How to connect the Internet at maximum speed. How to increase the speed of your Internet connection

The performance of a computer depends on its characteristics and the speed of the Internet. Its value affects the time of opening pages, downloading information from sites. To understand how to increase the speed of the Internet, it is necessary to clearly understand the whole range of technical tools and programs that affect the bandwidth of the signal receiving channel. The main influencing factors are the maximum speed provided by the provider, the length of the cables before and after the router, its bandwidth, the characteristics and programs of your computer.

Checking the connection speed and network status

Before starting connection speed tests, you need to find out the characteristics of receiving and transmitting information provided by your provider under the tariff plan. These values ​​are indicated in the contract for the provision of information services, or are located on the provider's website on the page describing the characteristics of different tariffs. Please note that sending information to the network is faster than downloading. Provider companies in the tariff plans indicate the maximum value of these two data.

Internet connection speed testing

The easiest way to check connection speed is to use special programs and sites. One of the most common is the speed test site speedtest.net. When you open the page at this address, a window appears on the screen with the button "Begin test". After pressing this button, the site initiates sending a ping (ping signal) to the server closest to you and measures the speed of transmitting and receiving a signal from the server. By clicking on the picture in the form of a prism in the center of the screen, the test can be repeated with a change in the control server.

Rebooting the Router

A frequent violation of signal reception is a failure in the protocols of routers (or routers). Such an effect can appear in the event of a short-term disruption of contact or the influence of some external electromagnetic interference on the information transmission channel. To solve this problem, you need to briefly turn off the router. After turning it on and establishing a connection with the server, the connection can be restored.

Conflicting Signals

If you use Wi-Fi to receive the signal, be aware that you may be delayed in receiving information due to other wireless networks and routers nearby. Most older routers operate on the 2.4 GHz transmission frequency. More modern routers use the 5 GHz channel. At the same time, the channel for receiving and transmitting information on the air is used in turn by all routers whose coverage areas are near you. An increase in Internet speed in such a situation is possible only by purchasing a new router with a 5 GHz channel.

How to increase internet speed

There are several ways to add internet speed to your computer. If you try to load a site you frequently use in different browsers, you will notice differences in loading. The fastest by far are Google Chrome, Mozilla Firefox, Opera and Yandex.Browser. The last two have a turbo boost mode for loading sites on a slow connection. Network speed may vary depending on the traffic-consuming software that is installed on your computer.

Checking your computer for viruses

One of the most malicious programs are viruses. These are programs that are designed specifically to create problems, big and small, in the operation of personal computer software. Many of them have the ability to steal saved logins and passwords from websites and financial applications from the computer's memory. You can get virus programs when downloading information from the network, viewing photo and video content from unfamiliar sites, receiving and reading letters received from unreliable sources.

Removing malware or adware

Computer software is protected by anti-virus programs, whose task is to detect attempts to intrude into a computer, determine the type of virus, and create obstacles to infecting it. Companies producing anti-virus programs collect, study all viruses on the network, create ways to deal with them. The most famous are the antiviruses of Kaspersky Lab, Dr.Web, ESET NOD 32, 360 Total Security.

Browser update

Regularly updating all software can significantly affect the speed of your computer. This applies to the operating system, video plugins, browser updates. The performance of different versions of browsers is different for each operating system. It is worth trying and choosing a fast browser for your computer. While browsing the web, users find interesting web resources and save them as Bookmarks. When updating browsers, all basic user settings, saved logins, passwords, bookmarks are saved.

Hard drive cleaning

The speed of receiving and saving information from the network depends on the speed of writing and reading your hard disk - hard drive. Service files may remain on it, the removal of which requires optimization and disk cleanup. The system utilities have a defragmentation function, the regular execution of which can organize the location of files on the disk. This utility collects pieces of files all over the disk and makes whole fragments from them, then whole files are assembled from fragments.

Cache optimization

Modern operating systems to speed up the work of programs frequently used by the user load them into the cache. The browser cache is a reserved portion of RAM or hard drive memory. Browsers are recommended to use the average value, which is suitable for most running programs. It makes sense to reduce the cache size in the browser settings only when performing the same type of operations on the computer.

Disabling unnecessary programs that consume traffic

If you open the Settings->Network and Internet->Data usage->Usage details tab in Windows 10, the user will be able to assess which applications are actively consuming data. To speed up the work, these programs can be disabled, limit their automatic updates. If the Internet is slow, you can limit the download of updates and the consumption of traffic by the system itself by setting the limited connection type: Settings-> Network and Internet -> Wi-Fi-> Advanced settings-> set as a limited connection.

Changing the channel of the Wi-Fi router

Wireless connections on cheap routers for the mass consumer operate in the 2.4 GHz band at maximum frequencies up to 300 Mbps. At the same time, the nominal speed is reduced by 2-3 times due to settings and other factors. In the presence of conflicting WiFi signals, it is worth purchasing routers or repeaters that work with WiFi protocols: 802.11g, 802.11n, 802.11ac, which have speeds up to 1000 Mbps, automatic switching between 2.4 GHz, 5 GHz frequency bands. High-quality WiFi signal transmission equipment is produced by ASUS, Totolink, Netgear.

How to speed up the Internet in Windows 7, 8 and 10

To speed up work in Windows, the following manipulations with the operating system and additional programs can help:

• removal of restrictions on the bandwidth of the network connection;
• configuring reserved bandwidth;
• optimization of equipment operation;
• Internet acceleration by choosing a fast DNS server;
• use of programs to speed up the connection;
• installing the TCP Optimizer utility;
• launching the Internet Speed ​​Booster application;
• using the Proximodo program.

Increasing network bandwidth

In order to improve the Internet connection due to the settings in the network connection bandwidth, you must perform the following steps:

1. Open Computer Properties->Hardware Tab->Device Manager.
2. Find the item Ports, press the down arrow.
3. Select the item Serial port (COM1), open its properties.
4. Select the port settings item and set the speed higher than the specified one.
5. Press the OK button.

Configuring Reserved Bandwidth

The Windows operating system has a QoS Reserved Bandwidth Limit system that specifically limits your traffic for its service applications. The width of this channel is about 20 percent of the maximum speed. To reduce the ability of the QoS packet scheduler to limit the rate, it is necessary to reduce the bandwidth of the reserved channel in Windows to zero and receive all 100% of the traffic. It is worth doing the following:

• Start->Run, type the word regedit, press the Enter key.
• In the registry editor, go to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft.
• Create a new key (Key) named Psched.
• Create a new DWORD value and name it NonBestEffortLimit.
• To disable channel reservation, set the NonBestEffortLimit key to 0.

How to increase the speed of home Internet by optimizing the operation of equipment

The speed of loading files and pages in the browser depends on many factors - the performance of the equipment and its settings. When checking the entire system for obtaining information, you should carefully consider the revision of all possible nodes that can affect the speed. When using satellite Internet, the connection is affected by wind, snow, rain, and other meteorological phenomena. In order to speed up the Internet on a computer, it is necessary to optimize the operation of the entire provider-browser system, check the quality and settings:

• network cables;
• router (router);
• network cards;
• Internet connection settings, DNS server selection;
• install special programs to increase speed.

Network cables

Connection performance may be affected by network cables. For this purpose, twisted pair is used. Home Internet wiring is done from the roof of the house or attic. The length of the network cable from the provider's junction box to your router should not exceed 50 m. It is necessary to monitor the absence of mechanical damage to the cable and the presence of power wires and cables passing near it that can induce strong electromagnetic fields. When using wired Internet, the distance from the router to the computer should be no more than 10 m.

Router optimization

You should start configuring the router by determining its model and version number. On the manufacturer's website in the support section, select your model, download the router firmware update. You will need to find the router's default gateway or IP address in order to access the router's web interface:

• From the Start menu, type cmd in the search box, at the command prompt, type ip/config/all.
• Enter the default gateway or IP address in the address bar of your browser. Press Enter, the web interface will appear in the web browser window.
• The option to update the router will be in the Administration section with the name Update or Upgrade firmware.
• Locate the firmware update file you just downloaded.
• Click Update, wait for the firmware update process to complete.

Most people surf the net in search of multimedia files. To speed up this process, an additional Wi-Fi Multimedia (WMM) standard has been developed. Users must check the box "WMM Enable" in the router settings. You should activate this function if you want to use the Internet without restrictions, and this is provided for by your tariff plan.

The Windows operating system automatically selects the network interface parameters for accessing the Internet by default. A configuration with several network interfaces such as network cards is often used - several network cards are used simultaneously to connect to the Internet, to a local network, use WiFi. To tell the system which interface to use and for what purposes, you must turn off automatic route discovery. To do this, each protocol must specify its own interface:

1. Open Start -> Control Panel -> Network and Sharing Center.
2. We find the Internet connection interface in the list, select Properties.
3. Select the Properties of the Internet Protocol version 4 we need.
4. On the "Advanced" tab, uncheck the Automatic metric assignment and set the serial number of the interface that will be selected for network requests, and more specifically for the Internet.
5. We perform a similar operation for all interfaces in ascending order.

Internet acceleration when choosing a DNS server

The speed at which sites load and download files depends on the DNS server that your computer accesses first. By checking the speed on the site speedtest.net, it is possible to change the server and notice the difference in the speed of receiving information. Most ISPs recommend that you set the TCP protocol settings to automatic DNS detection. It is not always the fastest server. To select a fast DNS server, use the DNSBench program found at https://www.grc.com/dns/benchmark.htm.

After downloading and running the program, you must perform the following steps:

1. Switch to the Nameservers tab, click the Add/Remove button.
2. Press the bottom button Build custom Nameserver List.
3. Switch to the Response Time tab, click the Run Benchmark button.
4. A window with multiple servers will open. The fastest will be at the top of the list. Select it and prescribe IP in the TCP settings.
5. Check your browser. If the download speed has not increased, you can roll back the changes.

Program to increase the speed of the Internet

To speed up the connection by optimizing system settings, use the AdvancedSystemCare program. To configure and redistribute traffic between protocols and applications, be sure to install FosSpeed. Combine different programs, methods, utilities. Most programs for improving computer performance, accelerator services for desktop computers, laptops, mobile devices are free and are downloaded online from software developers' websites.

TCP Optimizer utility

The capabilities of the computer when using the standard settings of the operating system and browser are not fully used. The operating system reserves part of the capacity for its service applications, Windows updates, and other cases. The TCP Optimizer utility will make it possible to automatically configure the best connection conditions by:

• reset TCP / IP and Winsock;
• choosing default network settings;
• automatic calculation of optimal network parameters;
• ping and trace route to nodes in the network;
• calculation of the maximum transmitted packet (MTU);
• calculation of RWIN/BDP parameters, packet delay time;
• configuring network settings through the system registry.

Optimizing the connection is possible using the Internet Speed ​​Booster application. These are three utilities that provide:

• checking connection speed, ping, host;
• optimization of Windows modem and network settings;
• preventing file fragmentation;
• scheduling automatic RAM optimization;
• protection against threats on the Internet;
• setting up the Windows Registry to increase the speed of information exchange on the network;
• support for all types of connections: Dial-Up, LAN, ISDN, cable;
• simple help files;
• supported OS: Windows 8.1, 8, 10, Vista, 7, XP, bit depth: 64 bit, x86, 32 bit.

Proximodo Program

Loading a site is accompanied not only by pure html code, but also by hidden tags or javascript programs, URL masking, pop-up messages, etc. The Proximodo program is capable of acting as an intermediary between a website and your computer's browser. By adding exceptions in this program, you can change the settings, remove everything that slows down the site:

• advertising banners;
• delete cookies when closing the browser;
• enable caching for fast page navigation.

Video

You can increase the speed of the Internet using special programs or using the capabilities of operating systems.

By default, the operating system reserves approximately 20% of the bandwidth of the entire Internet speed. As a result, 1/5 of the entire speed is lost. This feature can be easily disabled.

You need to go to start - execute and write gpedit.msc and click OK.

Then a group policy will appear in which you need to go to the following options: "computer configuration", "administrative templates", "network", "QoS packet manager" and then go to the "limit reserved bandwidth" menu.

Then you need to double-click to open the found tab and see the settings. Change the value to your liking.

Another parameter that affects the speed of the Internet, is a half-open connection restriction that was introduced by Microsoft to limit the spread of virus programs from sites or computers over a network and to limit the computer's possible participation in DoS attacks.

The rate limit is necessary so that the computer does not have more than 10 simultaneous half-open outgoing connections. When the speed reaches the connection limit, subsequent attempts to connect to the network are queued.

As a result, the user has a limited network, which negatively affects the operation of the Internet. This limit affects outgoing connections and does not change the speed of incoming connections.

To find out the number of half-open connections and check whether they are limited or not, you can use the special Half-open limit program. With its help, you can remove these restrictions.

Operating systems have a function to check for available updates for installed programs, which also slows down the Internet speed. These functions, at least a little, but reduce traffic when connected to the network. There can be up to several dozen such calls to search for updates. If you turn them off, you can slightly increase the speed.

However, there are programs which cannot be turned off the search for updates. This applies to those programs in which each update weighs up to 100 MB. In this case, you need to turn on the firewall, in which you can prohibit the network from accessing programs, as well as designate those that should be updated.

Increasing the speed in Windows XP, 7

Speed ​​increase through QoS packets

To increase the speed of the Internet in Windows XP, you must again go to gpedit.msc and in the "Computer Configuration" menu select "Administrative Templates", then "Network" and go to the "QoS Package Manager".

We increase the speed of the Internet through ports

There is another possibility to increase the speed of the Internet in Windows 7. To do this, go to " My computer' and open the tab ' properties of the system", then go to " device Manager and open ports.

You need to find the ports that are responsible for connecting to the Internet. Most often these are “catfish” ports. Ports can be from 2 or more. You need to open their properties and go to the "port settings" tab and then find the "bits per second" item parameter and set the maximum possible number. After that, the bandwidth will increase and the speed of the Internet will increase.

Notebook power mode

All laptops and computers running Windows 7 are set to Balanced Power Mode. If on ordinary PCs the speed of the Internet and the stability of the Internet connection, this mode is quite acceptable, then in the case of laptops with the Internet, problems may occur (if using a wireless connection). Internet connection via wi-fi may disappear due to the set balanced mode, or the Internet speed may drop.

If web pages take too long to load, and content is downloaded at a speed that clearly does not match the one promised by the provider, there may be various reasons for this. Fortunately, you don’t have to guess how to increase the speed of the Internet. To date, there are many effective techniques that can improve the quality of the connection to the World Wide Web. A noticeable difference can be noticed after a few minutes.

Method one of three: Check equipment, network status and Internet connection speed

1. Test your connection speed. Before you start setting up the equipment and PC, you should check the speed of the Internet, and then compare the result with that specified in the contract with the provider. Currently, there are many tests available on the network that allow you to measure this parameter. All you need to do is enter a query into the search line, like “test connection speed”, and then select the site you like from the top search results.

• A variety of test programs can show excellent results. Even with multiple checks on one resource, you can see different results over and over again. The result of the test is usually determined by the characteristics of the server location and how loaded the network is.
• It is best to pass repeated testing by finding the average value.
• In order to pass the test, in some cases it may be necessary to download and install plugins.
• If a resource offers to choose a server in order to check the connection speeds, it is better to prefer the one that is closest to your location. Thus, you will get the most accurate result.

2. The next step in increasing the speed of the Internet will be comparing the actual speed level with the promised provider. Information about the level of connection speed can be obtained from the customer support department.

It should be borne in mind that the provider will indicate the maximum possible value, but in fact it is far from always equal to this number.

• Having been “sitting” at a certain tariff for a long time, it is possible that you can increase the speed value for little money. Usually, providers do not inform the clientele about the appearance of cheaper tariffs. Therefore, check this circumstance yourself, and also check out offers from other regional Internet providers.
• Do not forget about the huge difference between megabits and megabytes. 1 MB (megabyte) is equal to 8 MB (megabits), so if your tariff involves paying for 50 Mb / s, then the maximum speed will be around six megabytes per second.

3. Try rebooting your router. Restarting it can solve a lot of connection problems. If the model of the modem you are using does not have a power button, you need to turn off the power supply, then wait half a minute and turn it on again.

4. The next step is to check that there are no conflicting signals. In the case of using a wireless router, it makes sense to check for a conflict with a stand-alone landline phone or camera. The fact is that there are 2 types of wireless routers with a frequency of 5.8 GHz and 2.4 GHz. If the phone and router operate on the same 2.4 GHz frequency, the connection speed will be slow when the phone is used by households. The same applies to surveillance cameras. Find out the value of the operating frequencies of the mentioned devices, if they are nine hundred megahertz, there is no reason for concern. But if it is 2.4 or 5.8 GHz, there is a chance that they provoke interruptions in your home network.

5. Check if the network traffic limit is over. All guesses on how to increase the speed of the Internet are in vain if your communication provider has set a limit on the traffic released to you, and you may not know this.

To check this circumstance, you should log in to the provider's website, or call the manager from customer support, where you will find out about the presence of a monthly limit and whether it has ended. If it is exceeded, your connection speed is limited artificially.

6. Make a call to the Internet service provider's customer support department. Sometimes only the provider company can deal with the problem of a slow connection. Moreover, troubleshooting, as a rule, does not imply a visit of a specialist to the house. The only thing you may be asked to do is reboot the router.

7. Thoroughly check each of the devices on your home network. If its other users often download content from the Internet, for example, watch video files or download movies, this takes up a considerable amount of space in the network bandwidth.

8. Try to reduce the gap between the router and the PC. When looking for a way to increase the speed of the Internet, and being connected to the network through a Wi-Fi router, make sure that the “slow” signal is not the result of a weak connection between the PC and the router. Place these two devices closer to each other, or place the router higher, so you will improve the quality of network signal reception.

• Clean the router of accumulated dust particles with a can filled with compressed air. Thus, you will protect it from possible overheating and allow you to work more stably.
• Try to create sufficient ventilation for all electrical components of the network in order to prevent them from overheating.

9. If you use DSL technology, it is worth checking the splitter. This refers to a compact box to which a cable from a fixed telephone is connected. On the reverse side there are a couple of "jacks" - designed for telephone connection, and also used to install a modem. If your Internet connection is via a telephone line and it will only be of high quality if you have a good splitter.

10. Study the weather forecast. In the presence of the Internet transmitted via satellite, the connection speed is quite capable of "jumping" under the influence of precipitation and winds, as well as other weather phenomena.

Method 2 of 3: Perform PC and Network Optimization

1. Scanning your computer with an antivirus should be done at least once every seven days. Viruses can not only threaten the loss of user information, but also adversely affect Internet speed. In order for the connection to be stable and fast, you need to protect your PC from all kinds of threats.

The PC should always be under the protection of a reliable antivirus. Moreover, it is not at all necessary to pay money for such software. It should be borne in mind that only one antivirus should be installed on the computer, otherwise such programs will conflict.

2. In addition to installing an antivirus, you should regularly run a PC scan to detect malware and adware in nature. Not all antiviruses detect this kind of spyware.

Meanwhile, these threats can significantly slow down the performance of the computer and reduce the speed of the connection, as they constantly connect to foreign servers. It is not so easy to expel these "malware", however, there are several utilities that are designed to detect and eliminate such unwanted software. By the way, you can install a number of programs of this kind at once:

• Hit Man Pro
• Spybot Search & Destroy
• Malwarebytes Antimalware
• Adw Cleaner

3. Get rid of unnecessary toolbars. If there are many toolbars in the browser, the connection can be very slow. By getting rid of them, you can increase the efficiency of your browser and provide protection against information leaks from your PC.

• Individual toolbars are not easy to remove. For this purpose, anti-spyware may be required, as mentioned above.

4. Change your browser. Looking for a way to increase the speed of the Internet, you need to check if your browser is overloaded with hard-to-remove add-ons, which slows down its performance. In this case, it may be better to start using a different browser. A priori, Firefox, Opera and Chrome function significantly faster than Internet Explorer.

5. Clean up the hard drive."Launched" it can significantly slow down the efficiency of the PC, which adversely affects your manipulations, and network ones too. You can optimize the hard drive in just a few minutes, as a result of significantly improving the quality of Internet surfing.

• Defragmentation of the "screw" should be performed regularly. Recent versions of Windows perform this procedure automatically.
• In order to clean up the disk from temporary files stored on it that slow down the browser, run the cleanup procedure.
• Make sure that there is always at least 15% of empty space in the system partition of the hard drive. When the disk is full, the programs, as well as the Internet browser, will start and function more slowly.

6. Optimize the cache. Browsers save web resource data in the cache in order to open pages more quickly in the future. In the event of a cache overflow, browser performance drops.

• How to clear the cache can be found by asking the appropriate query in the search engine.

7. Check and find out which of the installed programs are taking traffic. Often the speed of the Internet drops because the network is operated by other software products. To find out if some programs are sending requests to the network without asking your permission, use the Command Prompt. Press the keyboard shortcut ⌘ Win+R to open the Run dialog box. Next, type cmd and press ⌅ Enter. (If you have Windows 7 installed, you should open the Start menu>All Programs>Accessories, then right-click on the Command Prompt under "Run as administrator").

• You need to enter the command netstat -b 5 > activity.txt and press ⌅ Enter. The monitor will display a list of software connecting to the network. After waiting a minute, you should press ^ Ctrl+C in order to complete the search procedure. The system will issue a file with a list of active network connections.
• Next, you need to enter activity.txt and press ⌅ Enter, as a result, the file will open and you can see the program list.

8. Close any programs you don't need. You should simultaneously press the ^ Ctrl + ⎇ Alt + ⌦ Delete buttons, calling the Task Manager. Next, select the processes tab and disable all programs that can consume Internet traffic. (Be aware that interrupting processes with names you don't know about can result in program failures.)

• Read the process data in the "User" column. In the case when the process is launched on behalf of the System, stopping it can provoke a violation in the functioning of other software products, and you will need to restart the computer. If you have your username in the column, it is likely that the end of the process will not affect other programs. It happens that the system prohibits the completion of one or another internal process or it automatically restarts it.

9. Remove unused programs that take traffic. Having identified programs that overload the connection, remove those that you no longer use, as a result, traffic will be freed up for the browser to work.

10. Change the used Wi-Fi channel. In the case of using one single channel by many people in your house, the problem of how to increase the speed of the Internet for you is not idle. To identify free channels, try using the inSSIDer program for a computer and the WiFi Scanner or KisMAC applications for Mac.

By switching to a less busy channel, you can get rid of failures in the Internet network and, perhaps, you will be able to use the World Wide Web much more quickly.

• If an idle channel is found, switch to improve the connection speed. Not knowing how to change the Wi-Fi communication channel in the router, look at the user manual or the relevant information on the resource of the equipment manufacturer.

11. Update the router firmware. The firmware update can be found on the website of the manufacturer of your router. After comparing the latest version with the one available, upgrade.

Most modern models check the firmware version automatically when opening the hardware configuration page.

Method 3 of 3: Performing a Hardware Upgrade

1. Upgrade your computer. If the PC itself works "with brakes", this does not depend on the magnitude of the connection speed. It is truncated by the speed parameters of the PC.

• In order to increase the performance of the browser you are using, install a better (or at least additional) "RAM". This is one of the simplest and fastest methods of computer upgrades.

2. Upgrade your router. If you're using an older device, chances are it simply can't handle today's traffic load. Moreover, old devices have rather weak antennas, and this can make it difficult for a PC to connect to the Internet. All of the above conditions together can greatly affect the quality of the connection.

• When buying, give preference to routers from well-established manufacturers, such as Netgear, D-Link or Cisco. In order for a brand new router to fully meet your expectations, make sure that it is equipped with a truly powerful antenna.
• If the home network covers a considerable area, it makes sense to install a repeater. His duties will include relaying the wireless signal to another part of the home or office center, which will increase the area of ​​network coverage.

3. Change your old broadband modem. Under the influence of elevated temperatures, electrical devices tend to wear out. Over time, the modem will become more and more dishonest in fulfilling the tasks assigned to it (the ratio of a purely emitted signal to the level of interference will decrease, and the number of resent requests will increase). Modems from manufacturers who specialize in their release often work better than those offered by ISP companies.

• When buying a modem from a third party manufacturer, make sure that it supports the communication standards of your chosen Internet provider.

4. Use an Ethernet connection, not Wi-Fi. If possible, try connecting as many of your devices with cables as possible. In this case, they will connect to the Internet more quickly and conflict less with existing wireless devices - for example, a tablet.

• When thinking about how to increase the speed of the Internet, try a method such as trying to connect to the local DNS server. There are now models of routers that work with their own DNS server. It's worth trying the FastCache program, which caches the most visited domain names, which eliminates the need to check the IP when going to another page.
• Download programs that can speed up web surfing:
• Loband.org - so-called. a browser within a browser that loads resources without images.
• The popular browsers Firefox, Chrome and Opera have the ability to disable image loading.
• A special NoScript extension designed for Firefox blocks scripts and plugins that can slow down page loading.
• Using the Firefox browser, be sure to download the Firetune and Fasterfox extensions for yourself.
• You should not expect high speed using a mobile connection or a low-speed tariff. Most Internet resources use a broadband connection, whose speed is just over 500 kb / s. Sometimes, under these conditions, you have to wait.
• Use Google DNS by setting 8.8.8.8 as the preferred DNS Server and 8.8.4.4 as the alternate.

And at the end of the conversation on how to increase the speed of the Internet, a couple of caveats:

• Do not trust advertising promises to increase your connection speed for free. Such programs, as a rule, only detect the presence of problems on the PC, but do not solve them until you pay for the registration of the software product, or purchase the version with full functionality.
• The download speed can be small, even if the network is functioning at a good level. When downloading from a slow remote server, you will need to wait a long time for the download to complete.

The speed of access to the Internet, voiced by the provider, often does not correspond to reality. The problem often lies not only in the quality of the services provided, but also in the configuration of the devices used by the end user. This article is intended to answer the question of how to increase the speed of the Internet to the one promised when concluding an agreement with a telecom operator.

First of all, you need to pay attention to the settings of the operating system installed on the PC, as well as to exclude the possibility of malware affecting the data transfer speed on the Internet.

Checking "eaters" of traffic

To begin with, you should check running applications: a torrent client included at system startup, a game service, or other programs that require constant access to the Internet. These are possible "provocateurs" of improper speed.

Detailed information about traffic consumption in the "Task Manager" is available only to users of Windows 8 and higher systems. For Windows 7 there is another way.

In the "Processes" tab there is a column with the heading "Network", here you can find out which application and to what extent affects the speed and consumed Internet traffic. Disabling currently unnecessary programs occurs by selecting the appropriate application and clicking the "End task" button.

In editions of the Windows 7, 8 system, there is a similar utility called "Resource Monitor". To access it, you need to enter the phrase "Resource Monitor" in the search line "Menu" - "Start", run the program that will be issued upon request. Next, select the "Network" tab: by default, the processes in it are sorted by the number of bytes consumed per second. It is impossible to close the processes that affect the speed of access to the Internet through this program, therefore, having identified the consumer, you need to return to the "Task Manager" and remove the task corresponding to the exe file:

The speed of the Internet can temporarily decrease due to the activity of the "Update Center", which is also noted in the "Task Manager" under the corresponding item. You must wait until the download from the Internet is completed and the operating system updates are installed on the PC, and then continue with normal work.

Setting up the package scheduler

Further actions will be aimed at reducing the bandwidth limit. The Windows system reserves 1/5 of the total passing traffic and this can adversely affect the speed of the Internet. This limit must be reduced to zero.

The launch of the "Local Group Policy Editor", where the scheduler will be configured, is carried out by pressing the Win + R key combination and entering the gpedit.msc command in the window that opens:

In the "Editor" you should go to the following folder: "Computer Configuration" - "Administrative Templates" - "Network" - "QoS Packet Scheduler". Several items will appear on the right side of the window, the desired one is “Limit reserved Internet bandwidth”:

In the window that opens, click the "Enable" item, and in the lower field called "Parameters" set the "Bandwidth limit" value to 0%. When finished working with the window, click the "Apply" and "OK" buttons. Now the system will not limit the Internet speed:

The default scheduler is sometimes disabled in adapter options. To check through the "Start" menu, select "Control Panel", then - "Network and Sharing Center". The connection is displayed as active. To go to the "Connection Status" window, click on the name. In the window that opens, click on the "Properties" button and activate the "QoS Packet Scheduler" item, confirm the selection by clicking the "OK" button. It is recommended that you restart your computer after completing this procedure. The question of how to remove the default Internet speed limit in Microsoft has been resolved!

Setting up a network card

For better system power efficiency, some device settings are set to save mode. This also applies to a network card installed in a personal computer.

From the Start menu, go to Control Panel. In the "System and Security" section, you need to find a utility called "Device Manager":

In the "Manager" window, double-click on the "Network adapters" item to get a list of available devices. An adapter is selected by double-clicking on it.

In the "Power Management" tab there are two items: "Allow the device to turn off" and "Allow the device to wake the computer from standby (sleep) mode." We remove the modes by unchecking the boxes. The settings are confirmed by pressing the OK button. After restarting the computer, it is recommended to check the Internet speed:

On laptops, this setting is quite critical: the computer's battery life is at risk of decreasing. If you notice an increase in the battery discharge rate after performing this action, it is recommended to return the checkmarks to their places.

Change the power plan

Changing the power plan to a more productive one will positively affect the speed of the network adapter. In the "Control Panel" you need to find the "System and Security" section, then "Power Options". The required item "High performance" is activated by clicking on it:

This setting will increase the supply of electricity to the elements of a personal computer, which will increase the speed of Internet access. As in the case of deactivating the disconnection of the network adapter, the laptop battery discharge rate may increase, then you should use this power plan only while the portable device is running from the adapter if you need to resolve the issue of how to speed up the Internet on the laptop.

COM port extension

To configure the serial COM port through the Start menu, enter the Device Manager utility. Double click - in the "Ports (COM and LPT)" section. The transition to the properties of the device called "Serial port (the abbreviation COM with a number must be indicated in brackets, in our case - COM3)" is also carried out by double-clicking on the name:

In the "Port Settings" tab, find the "Bits per second" indicator and select "128000" in the drop-down list. To confirm - "OK":

By increasing the maximum throughput of the port, the likelihood that the speed of access to the Internet network will increase to the required values ​​increases.

Installing additional programs

To help standard solutions from Microsoft come developments from third-party manufacturers that allow you to expand the capabilities of the Internet on your computer.

TCP Optimizer (https://www.speedguide.net/files/TCPOptimizer.exe) is free software distributed through the SpeedGuide resource. The program is positioned as accelerating access to the Internet by changing the TCP / IP settings, allowing you to remove the Internet speed limit:

After downloading and running, no installation is required, TCP Optimizer immediately offers the user an interface. On the main General Settings tab in the upper part there is a slider that must be set to the position corresponding to the Internet connection speed declared by the provider. In the Network Adapter selection drop-down menu, select the network adapter, and at the very bottom of the window, in the Choose settings item, check the box for Optimal. The choice is confirmed by pressing the Apply changes button and rebooting the PC.

The second assistant in resolving the issue of how to speed up the Internet , - a free utility from Softonic - NameBench (https://en.softonic.com/download/namebench/windows/post-download?sl=1). It selects the best DNS server from the list, allowing you to access site domains through the fastest intermediary:

The program is installed by unpacking it into a user-friendly directory. After running the maximum that is required, press the Start Benchmark button. The search takes a certain time: the resource has a large number of sources.

When the search is completed, the default browser displays the result for the current DNS setting and the recommended configuration - Recommended configuration (fastest).

Checking and configuring DNS

Through the "Control Panel" select the sub-item "View network status and tasks", located in the "Network and Internet" section. Here you will need to select an active network, clicking on which takes you to the connection status window, and from there to "Properties". When using the IPv4 protocol, you need to highlight this item by pressing and go to "Properties":

The main tab "General" contains the addresses of the DNS servers provided by the provider by default:

In the sections of the DNS servers “Preferred” and “Alternative”, you need to enter data from the NameBench program, then check the box “Confirm settings on exit” and close the window by clicking the “OK” button.

Virus check

The first thing to do, if familiar, is to check the PC with antivirus software. An effective utility that does not require installation and constant work in the background - Dr.Web CureIt! (https://free.drweb.ru/download+cureit+free/):

Before starting, you need to close all programs, including those using the Internet. After launching the anti-virus package, click on the "Start scan" button and wait for the completion of the verification process and treatment.

Fix your router

If the devices are connected to the Internet through a router, it must be serviced to ensure maximum speed.

Features of a DSL connection

In ADSL connection technology, an important role is played by a splitter - a small “double” device, on one side of which a fixed telephone is connected, on the other - a modem and a telephone line. It is important to check the connections and sockets of the splitter, if necessary, replace it with an improved version.

Firmware update

With the release of new software, router hardware problems that affect the speed of Internet access are often fixed. Keep the device software up to date at all times.

On the packaging or on the back panel of the router, the data for entering your personal account is indicated. As a rule, access to the interface occurs at the addresses: 192.168.0.1 and 192.168.1.1, the login-password link is admin-admin.

Among the menu items you need to find "Firmware Update". For a successful process, the router must be connected to the computer on which the update is being searched for via an Ethernet cable.

Determining the correct location of the router

It is necessary to install a router in the center of an apartment or room at a height of 1.5-2 meters. It is not recommended to place other signal sources of wireless interfaces - Bluetooth, other Wi-Fi points - in the immediate vicinity of the router. Compliance with all these requirements will increase the speed of the return of the Internet several times.

Changing the Wi-Fi channel

If Wi-Fi access points are installed everywhere, there is a high chance that they will interrupt each other's signal. It is important to remember that Wi-Fi points operate on certain channels. An easy way to find out if a channel is busy is to download the Wi-Fi Analyzer app on your smartphone from the Google Play Store or App Store. A free utility shows the signal strength in the form of a graph, which clearly shows empty zones - free channels:

Having determined the best option, in the router interface, in the Wi-Fi settings section, you need to find an item called "Channel". After setting the desired value, you should save the setting and reboot the router, and then check the data transfer rate.

Check for unauthorized connection to the router

One of the possible options for "leaking" the speed is to connect to the router of third parties. This happens when there is no password on the access point, or the password from the point is easily selected.

Detecting "illegal immigrants" is very simple: through the interface of the router. The Wi-Fi Status tab contains a list of connected devices. If an unfamiliar device is among the listed devices, it is recommended to immediately set or change the password of the Wi-Fi point in order to protect your Internet traffic from external use.

Choosing a Fast Browser

Additional functionality in popular browsers, for example, Turbo mode, can speed up the loading of pages on the Internet:

Opera and Yandex Browser have a built-in "accelerator". By enabling this mode, the user does not download the site directly to the computer, but sends it to secure servers on the Internet, where the media is compressed, then the processed page is sent to the computer, while the download speed increases significantly.

Google's browser - Chrome - does not have this mode, however, the Google store has an official add-on called "Traffic Saver", after installing it, it becomes possible to reduce up to 70% of the size of media files downloaded from the Internet.

The 2ip service conducted its own research, during which browsers with Turbo and similar modes enabled were tested. The test showed that in Yandex.Browser, the speed of loading pages from the Internet on a 3G modem is almost instantaneous. This fact allows us to designate this browser as optimal for slow connections, and the problem of how to remove the limitation on the speed of the Internet connection has been solved again.

In order to increase the speed of the Internet, it is recommended to use the following useful tips that make it possible to correct the situation at home, namely:

1. Choosing the most efficient tariff. The subscriber's existing plan may simply not meet the requirements. Switching to a high speed package is one of the preferred actions.
2. Modernization of a personal computer. The network card installed in the PC may be outdated or out of order, which negatively affects the speed of the Internet connection. A new generation external network adapter will solve the problem of slow access.
3. Purchasing a new router. Modern technologies, including the 5GHz frequency standard, which replaced the outdated 2.4GHz, will save you from "brakes" and freezes when loading.
4. Connecting to another server. Remote hosting may be located too far from the current location of the computer, which affects the connection speed with the server on the Internet. The same applies to overloaded servers, it is worth waiting until the load peak decreases.
5. Establishing an Ethernet cable connection. Internet operation without wires is convenient, but less reliable than the cable option. If you find a speed drop when working with wireless interfaces, you should try an Ethernet connection.

Users on the global network will find a lot of other recommendations on how to overclock the speed of the Internet, but some of the tips are already outdated, and some are not safe for a PC. The main thing, perhaps, is that you can accelerate, but maintain a reasonable balance between comfort on the Internet and the security of data on your computer. The second seems to be more important than the first.

And so, you have a slow connection and you want to know how to speed up the Internet. There is a good way to increase the speed of the Internet! We will talk about it now.

To do this, you need to speed up DNS queries.

Actually, I will not breed here a purely theoretical debate on the topic of DNS, just take my word for it: It works, and how!

For those who do not know what DNS is, I will give a couple of common educational program phrases:

DNS is a domain name server. In simple terms, this is something like a registration service in the passport office ...

In general, the bottom line is that when you click on any link in the browser, we are first sent to the DNS server where they give the exact address of the site. Well, somewhere like this...

But the trick is that there are a great many such servers, and unfortunately not all of them are fast. The reasons can be completely different, from the remoteness of the server to its workload.

Therefore, we need to connect to the closest and least loaded server in relation to our location. In addition, it must also be the fastest.

In general, the task is not an easy one ... if you do everything manually.

But fortunately, our valiant programmers are not asleep, and thanks to them we have several miracle programs that will do all this dirty and backbreaking work for us.

I will not give a description of all programs here, since there are many of them and they are all quite similar.

However, the undisputed leader among such software is the Dns Jumper program.

1. First of all, the program is completely free.
2. Secondly, multilingual (..there is also Russian)
3. Third, fully automates the entire process

And so let's start solving the question: How to speed up the Internet

To get started, watch this video:

2. Unpack the downloaded archive into a separate folder. The program does not require installation, you just open the folder and run the DnsJumper.exe file, preferably as an administrator.

3. Install the appropriate language.

4. Click the "Quick DNS" button.

5. In the window that appears, check the boxes next to all the servers that are in the list, for which you need to scroll the list to the end, since by default only the first few servers are ticked.

6. Then click the "Find fast DNS" button.

7. At the end of the search, check the "Mix" box and click "Apply fast DNS".

8. And once again "Apply" (save the data).

9. And finally, it is necessary to clear the DNS cache of our computer so that everything goes according to new records. For what we press the button "Reset Cache".

Watch another video on speeding up the Internet using the Cfosspeed program

Take a couple of minutes and you won't regret it!

If this article was useful to you, then please click on any button of your favorite social network.