Commands for a syringe in cs go. All console commands in CS:GO (CS:GO). Here are some good examples

Ammunition cache CS GO is an item that can be found in the “Joint Raid” mode in Counter-Strike: Global Offensive.

The cache itself is a small metal container filled with ammunition. In addition, next to the containers there are small cartridges with small-caliber cartridges. Ammunition caches can be found in secluded places during the mission. After use, the cartridge from the container and cartridges disappear. All that remains is an empty container and a box of ammunition.

Collectible coin

Collectible coin- an item that can be found in the “Cooperative Strike” mode in Counter-Strike: Global Offensive.

The coin can be found during missions in the “Joint Raid” mode. To pick up a coin, you just need to walk around it. For selection, additional points are given towards the overall score for the mission.

Each mission has 3 coins that can be hidden in secluded places. After all 3 coins are collected, 5000 points are added to the total score for the player and his friend.

Heavy armor

Heavy armor- equipment that appears in the “Joint Raid” mode in Counter-Strike: Global Offensive. Released on February 18, 2016 as part of Operation Wildfire.

The armor provides increased resistance to damage. The player can survive the explosion of 5 frag grenades at point blank range. can kill only after three shots to the chest, or two shots to the head. In addition, the armor allows you to withstand 2 stabs in the back with a knife.

Medical syringe

Medical syringe- healing equipment that appears in the “Joint Raid” mode in Counter-Strike: Global Offensive. Released on February 18, 2016 as part of Operation Wildfire.

Tactical grenade

Tactical grenade- an auxiliary grenade that appears in the “Joint Raid” mode in Counter-Strike: Global Offensive. Released on February 18, 2016 as part of Operation Wildfire.

The grenade is only available in the “Joint Raid” mode. It can be taken at the beginning of the mission in the weapons room next to other grenades and weapons. Unlike other grenades, this grenade does not bounce off the surface, but sticks to it. You can only use one tactical grenade at a time.

Once a grenade is thrown, it will beep for 2 seconds, enemy locations will be marked on the radar, and the player will be able to see enemy locations through walls for 3 seconds. Also at this moment, the grenade emits tracer lines leading to enemies.

If you are looking for console commands for Counter-Strike: Global Offensive, then here you will find all the console commands for the CS!

You must enter console commands in the developer window using the key "~" (Yo). But before that, do not forget to enable the option in the game parameters

Thanks for the information provided.

Are these cheats?

Absolutely not. After all, these console commands are officially in the game. They can only be used on a local server you created with bots or friends. You can practice your skill or just make fun of your friend 😀

Where to enter commands (cheats)?

All commands are entered using the console, which opens by pressing the “е” or “~” key.

These commands can only be entered on the local server; in matchmaking these commands will not be valid

Here is an example of how to enable wallhack in CS:GO:


Player

  • sv_cheats 1 - the main command, activates the ability to enter “cheats”.
  • sv_cheats 0 - prohibits the entry of “cheats”.
  • mat_wireframe 1 - wallhack, allows you to look through walls.
  • mat_wireframe 0 - disables the ability to look through walls.
  • r_drawothermodels 2 - allows you to see players through walls.
  • r_drawothermodels 1 - disables this feature.
  • r_drawparticles 0 - ability to see through smoke.
  • noclip - flight through walls. Re-entering the noclip command disables this feature.
  • thirdperson - third person view.
  • firstperson - first person view (standard view).
  • cl_righthand 0 - changes the hand to the left with the value “0” and vice versa with the value “1”.
  • god - immortality.
  • kill - kill yourself.
  • disconnect — exit the server to the main menu.
  • weapon_recoil_scale 0 — turn off recoil
  • sv_infinite_ammo 1 - enable infinite ammo.
  • sv_showimpacts 1 - show the cross.
  • sv_showimpacts_time 5 — shot time in seconds.
  • sv_grenade_trajectory 1 - show grenade trajectory.
  • sv_grenade_trajectory_time 20 — grenade trajectory time in seconds.
  • mp_maxmoney 16000 - money limit.
  • mp_startmoney 16000 — issue starting money.

Weapon/armor/health

  • give weapon_awp - give AWP
  • give weapon_aug — give AUG
  • give weapon_ak47 - give out AK-47
  • give weapon_m4a1_silencer - give M4A1-S
  • give weapon_m4a1 — give M4A4
  • give weapon_galilar — give Galil AR
  • give weapon_famas - give FAMAS
  • give weapon_p90 — give P90
  • give weapon_ump45 — give UMP-45
  • give weapon_mac10 — give MAC-10
  • give weapon_xm1014 — give XM1014
  • give weapon_elite - give Dual Berettas
  • give weapon_fiveseven - give five-SeveN
  • give weapon_deagle — give Desert Eagle
  • give weapon_usp_silenser - give USP-S
  • give weapon_glock18 — give Glock-18
  • give weapon_m249 — give M249
  • give weapon_tec9 — give Tec-9
  • give weapon_negev - give Negev
  • give weapon_scar20 — give SCAR-20
  • give weapon_sawedoff - give Sawed-Off
  • give weapon_nova - give Nova
  • give weapon_ssg08 — give SSG 08
  • give weapon_sg553 — give SG 553
  • give weapon_cz75a — give CZ75-auto
  • give weapon_hkp2000 - give P2000
  • give weapon_taser - give Zeus
  • give weapon_knife - give out a knife
  • give weapon_knifegg - give out a golden knife
  • give weapon_hegrenade - give a grenade
  • give weapon_flashbang - give a flashbang
  • give weapon_smokegrenade - give out a smoke grenade
  • give weapon_molotov - give out a Molotov cocktail
  • give weapon_decoy - give out a decoy grenade
  • give weapon_healthshot - give out honey. syringe (first aid kit)
  • give weapon_tagrenade - give out a tactical grenade
  • give item_cutters - give a demining tool
  • give weapon_с4 - give c4
  • give item_assaultsuit - give out armor
  • give item_heavyassaultsuit - give out heavy armor
  • give weapon_taser

Map/rounds/time/team

  • mp_respawn_on_death_ct 1 - instantly resurrect a CT after death.
  • mp_respawn_on_death_t 1 - instantly resurrect T after death.
  • bot_add_t — Add a bot to T
  • bot_add_ct — Add a bot to CT
  • bot_defer_to_human_goals - with a value of 1, bots will do what they are supposed to do on the map according to the scenario: plant a bomb, defend a plant, rescue or protect hostages. At 0 they will not do this and will behave unpredictably.
  • bot_defer_to_human_items - at 1 the bot will take a bomb, and at 0 it will not do so.
  • bot_difficulty - bot difficulty. Value from 1 to 3.
  • bot_dont_shoot - with a value of 1, bots become vegetables that simply stand rooted to the spot at the sight of you, but do not shoot. You understand what scope this opens up for experimentation. An easy way to get achievements, by the way.
  • bot_freeze - at 1, bots instantly freeze where they are. Convenient to check for lumbago, etc. For convenience, you can bind it.
  • bot_quota - the total number of bots that can be added.
  • bot_knives_only - at 1, bots run with knives. At 0 with any other weapon.
  • bot_pistols_only - at 1, bots only use pistols.
  • bot_stop - value 1 instantly stops bots and prohibits them from shooting.
  • bot_show_battlefront - set it to 1 and see where the bots will meet according to the game’s calculations. Again, very convenient, especially if you are training to take different points - All where you can know in advance where they will contact you.
  • bot_crouch - set to 1 and bots will move around the map on their haunches. Both fun and useful.
  • bot_chatter - set it to 1 and no longer hear any easy peeps from bots. The command prohibits bots from using radio chat.
  • bot_join_team (T or CT - which team the bots will join.
  • bot_join_after_player 1 - bots join after the player.
  • bot_take_control - take control of the bot.
  • mp_solid_teammates 1 - team players pass through their own
  • mp_limitteams 32 — limit of players in a team.
  • mp_autoteambalance 0 — balance of players in the team.
  • bot_kick — kick bots from the server.
  • mp_free_armor 1 - give everyone armor.
  • mp_teammates_are_enemies 0 - make allies enemies.
  • bot_stop 1 - bots stand still.
  • bot_knives_only - bots only use knives.
  • bot_pistols_only - bots only use pistols.
  • bot_all_weapons - bots use all weapons.
  • mp_warmup_end - end warm-up.
  • mp_warmup_start — enable warm-up.
  • mp_warmuptime 350 — warm-up time (in seconds).
  • sv_gravity 500 — enable reduced gravity.
  • mp_restartgame 1 - restart the match (the value 1 determines the time after which the match will restart in seconds).
  • mp_buy_anywhere 1 — enable the buy zone throughout the map.
  • mp_buytime 20 — time to purchase weapons at the beginning of the round.
  • mp_freezetime 0 — freezing movement at the beginning of the round (in seconds).
  • mp_maxrounds 30 — number of rounds in the match (0 disables the limit).
  • mp_roundtime_defuse — maximum round time for de cards (in minutes).
  • mp_roundtime_hostage — maximum round time for cs maps (in minutes).
  • mp_roundtime — maximum round time for other maps (in minutes).
  • mp_timelimit — maximum match time (in minutes, 0 disables the limit).

Client settings

  • cl_draw_only_deathnotices 1 — Turn off the interface.
  • con_enable 1 — Activate the console
  • crosshair 1 — Turn on the crosshair
  • cl_language russian — Game language
  • cl_autohelp 0 — Turn off tooltips
  • cl_allowdownload 1 - Download maps, models and decals from the server when connected.
  • cl_allowupload 0 — Disable uploading maps, models and decals to the server when connecting.
  • cl_autowepswitch 0 - Disable automatic change of selected weapons.
  • cl_chatfilters 63 — Chat filter
  • cl_class default — Select player skin (default)
  • cl_clearhinthistory 1 - this command clears hint memory. Sometimes it helps to raise a few FPS, but rarely.
  • cl_cmdrate 128 — The number of packets that the client can send to the server.
  • cl_observercrosshair 1 — Display crosshair in observation mode.
  • cl_dynamiccrosshair 0 — Enable dynamic crosshair (expands while moving and jumping.)
  • cl_fixedcrosshairgap 0 — New crosshair size
  • cl_scalecrosshair 1 - Enables the ability to change the crosshair size.
  • cl_crosshairsize 6 — Crosshair size
  • cl_crosshairalpha 200 — Crosshair transparency
  • cl_crosshaircolor 5 — (0 — Green; 1 — Red; 2 — blue; 3 — Yellow; 4 — Light Blue; 5 — The crosshair color is assigned by RGB commands.)
  • cl_crosshaircolor_r 60 — Crosshair color (Red)
  • cl_crosshaircolor_b 80 -Crosshair color (Blue)
  • cl_crosshaircolor_g 240 — Crosshair color (Green)
  • cl_crosshairdot 1 — Dot in the center of the crosshair
  • cl_crosshairstyle 1 — Changes crosshair types
  • cl_draw_only_deathnotices 1 - hides the interface. 0 turns the HUD back on
  • cl_crosshairthickness 0.5 — Crosshair thickness
  • cl_crosshairusealpha 1 - Enable/disable transparent crosshair.
  • cl_debugrumble 0 - Disables/Enables Rumble debugging.
  • cl_detail_avoid_radius 0 — Object drawing distance (1)
  • cl_detail_max_sway 0 — Object drawing distance (2)
  • cl_disablefreezecam 1 — Remove the death screen
  • cl_downloadfilter nosounds - Select which files can be downloaded from the server.
    (all - Download all files. none - Do not download files. nosounds - Do not download sounds).
  • cl_forcepreload 1 - Load information about textures and models at the beginning of the map.
  • cl_interp 1 — Time interval through which interpolation occurs.
  • cl_interp_ratio 2 — Number of intervals between world interpolation.
  • cl_lagcompensation 1 - Compensates lags on the server side.
  • cl_logofile materials/vgui/logos/t1.vtf — The path to your spray
  • cl_playerspraydisable 0 — Enable display of player sprays
  • cl_mouselook 1 - (1 - to look around using the mouse. 0 - using the keyboard.)
  • cl_predictweapons 1 - Predicts weapon effects on the client side.
  • cl_resend 6 — The time after which the packet will be sent if the previous one did not arrive.
  • cl_righthand 1 - Weapon in the right hand
  • cl_rumblescale 1.0 — Rumble effect sensitivity scale.
  • cl_showerror 0 — Close the prediction error window
  • cl_showfps 0 - Disables the FPS indicator at the top of the screen
  • cl_showhelp 1 — On-screen help
  • cl_showpluginmessages 1 - Allows plugins installed on the server to show you messages (advertising, etc.).
  • cl_soundfile sound/player/jingle.wav — Jingle sound file
  • cl_spec_mode 1 — Spectator mode (4 — From the player’s point of view; 5 — Linking a flying camera to the player; 6 — Flying mode)
  • cl_team default — Select a team when connecting to the game.
  • cl_timeout 30 - Automatically disconnect from the server if it does not respond.
  • cl_updaterate 128 — The number of packets that the client can receive from the server.
  • closecaption 0 — Subtitles
  • closeonbuy 0 — Closing the store after purchase
  • clientport 27005 — Client port
  • cl_teamid_overhead_always 1—shows a small triangle above the teammate
  • +cl_show_team_equipment - shows information about which weapon, how much hp, how many grenades, etc. This can also be seen through the walls.

Voice chat/volume

  • voice_enable 1 — enable Voice chat.
  • voice_scale 1 — volume of teammates’ voices.
  • volume 1.0 — general sound volume.
  • voice_modenable 1 — voice chat is in mode.
  • windows_speaker_config 1 - speaker type - headphones.
  • voice_forcemicrecord 1 — enable microphone recording.
  • voice_recordtofile 0 — turn off microphone recording to a file.
  • voice_loopback 0 — disable voice playback along with other players.

Graphic arts

  • muzzleflash_light 0 - disable dynamic flash lighting.
  • mat_autoexposure_max 3 - Screen brightness to maximum.
  • mat_autoexposure_min 0.5 - Screen brightness to minimum.
  • mat_disable_bloom 1 - Disables glow.
  • mat_queue_mode 2 - Enables multi-core rendering.
  • mat_savechanges - Saves your settings to the Windows registry.
  • mat_setvideomode 1280 720 1 - Allows you to change the screen resolution to any value.

Sounds

  • dsp_enhance_stereo 1 - Enables stereo sound.
  • dsp_slow_cpu 0 - Maximum sound quality.
  • dsp_volume 1.0 - Volume to 100%
  • snd_mixahead 0.1 - Audio buffer size.
  • snd_musicvolume 0.2 - Music volume. (here it is 20%)
  • suitvolume 0 - Reduces the volume of shots.

Mouse

  • sensitivity 1.200000 — Sight movement speed
  • m_customaccel 0 — Custom mouse acceleration
  • m_customaccel_exponent 0 — Disable acceleration proportionality coefficient measurement.
  • m_customaccel_max 0 — Maximum acceleration proportionality coefficient
  • m_customaccel_scale 0.04 — Custom mouse acceleration value
  • m_forward 1 — Sets the mouse forward speed sensitivity multiplier
  • m_mouseaccel1 0 - Windows mouse acceleration, initial threshold (2x movement)
  • m_mouseaccel2 0 - Windows mouse acceleration, medium threshold (4x movement)
  • m_mousespeed 1 — Mouse acceleration factor in Windows
  • m_pitch 0.022 — Mouse inverted (Disabled)
  • m_rawinput 1 - Direct mouse connection, ignoring OS control panel settings.
  • m_side 0.8 — Sets the mouse movement speed sensitivity multiplier
  • m_yaw 0.022 — Sets the speed sensitivity multiplier for left-right turns

FPS/HUD

  • fps_max 300 — Limit the number of frames per second (FPS) (0 - no restrictions).
  • func_break_max_pieces 15 — Number of fragments from boxes, bottles, barrels, etc.
  • hud_scaling 0.85 — Menu settings for displaying time, life, etc.
  • hud_showtargetid 1 — Display his nickname when hovering over a player.
  • hud_takesshots 0 — Auto screenshot tab at the end of the map

Binds in CS:GO

Bind- this is the assignment of a specific key to execute a command or a series of commands. Binds can be used both to purchase any items and for console commands (so that you don’t have to register them each time, but just press a key).

To bind a key, you need to: open the console with the “~” key. (You don’t need to enter them every time, because the game will save them). Enter the command for the bind: bind (the key to which we want to assign the purchase of the item) “buy (what we buy)”
For example:

  • bind f2 “buy ak47; buy m4a1; buy vest; buy deagle; buy flashbang; buy smokegrenade; buy molotov; buy incgrenade; buy defuser"
    With this command we set the “f2” key to buy: AK-47, M4A1, armor, Desert Eagle, flash grenade, Molotov cocktail, incendiary grenade, Defuse Kit.
    It is worth noting that the purchase of an AK-47 and a Molotov cocktail will only be available when playing as terrorists; and M4A1, incendiary grenade and Defuse Kit - only when playing as counter-terrorists.
    Another example:
  • bind v noclip - this entry means that we bind the noclip command to the “v” key.

Names of NumPad keys for binds:

  • kp_slash ("/" key)
  • kp_multiply ("*" key)
  • kp_minus (key “-“)
  • kp_home (key "7")
  • kp_uparrow (key "8")
  • kp_pgup (key "9")
  • kp_leftarrow (key "4")
  • kp_5 (key "5")
  • kp_rightarrow (key "6")
  • kp_end (key "1")
  • kp_downarrow (key "2")
  • kp_pgdn (key "3")
  • kp_ins (key "0")
  • kp_del (key ".")
  • kp_plus (+ key)
  • kp_enter (Enter key)

Here are some good examples:

  • bind kp_home “buy awp”
  • bind kp_uparrow “buy g3sg1; buy scar20″
  • bind kp_pgup “buy ssg08″
  • bind kp_leftarrow “buy ak47; buy m4a1″
  • bind kp_5 “buy sg556; buy aug"
  • bind kp_rightarrow “buy galilar; buy famas"
  • bind kp_end “buy p90″
  • bind kp_downarrow “buy bizon”
  • bind kp_pgdn “buy mac10; buy mp9″
  • bind kp_minus “buy deagle”
  • bind kp_plus “buy tec9″
  • bind kp_enter “buy p250″
  • bind kp_ins “buy defuser”

To unbind a key, you just need to write the command:
unbind (the key we want to unbind)

1 ml of the drug contains:

  • active substance - Hylan (Hylan G-F 20) 8 mg
  • excipients: sodium chloride - 8.5 mg; sodium hydrogen phosphate - 0.16 mg; sodium dihydrogen phosphate - 0.04 mg; water for injection - up to 1 ml

Release form

Solution for intra-articular administration. 2 ml in glass syringes. 3 syringes in a cardboard box

pharmachologic effect

Synvisc is a sterile, pyrogen-free, viscoelastic liquid containing hylans. Hylans are derivatives of hyaluronan (sodium salt of hyaluronic acid) and consist of repeating disaccharide units of N-acetylglycosamine and sodium glucuronate. The average molecular weight of hylan A is about 6 million. Yes, hylan B is a hydrated gel.

Synvisc is a biological analogue of hyaluronan. Hyaluronan is a component of synovial fluid that determines its viscoelastic properties.

Synvisc temporarily replaces and replenishes synovial fluid; effective in patients at any stage of joint pathology; most effective in patients with active and regular load on the affected joint; achieves its therapeutic effect by restoring viscosity, thereby restoring the rheological properties of the synovial fluid and the physiological properties of the tissues of the joint affected by osteoarthritis.

Viscosity restoration is a treatment aimed at reducing pain and discomfort, as well as increasing the range of motion in the joint. In vitro studies have shown that Synvisc protects cartilage cells from certain physical and chemical damage.

Synvisc is intended only for intra-articular administration by a physician for the treatment of pain caused by osteoarthritis of the knee, hip, ankle or shoulder joint.

Indications for use

Osteoarthritis of the joints:

  • hip
  • knee
  • ankle
  • shoulder

Directions for use and doses

Intra-articular. Synvisc should be administered at room temperature.

Intra-articular administration of the drug can only be carried out by a specialist

Before each Synvisc injection, synovial fluid or intra-articular exudate should be removed.

Synvisc should not be used if the packaging is opened or damaged.

A needle of the appropriate size (18–22) and length is selected by the doctor depending on the joint into which the injection is intended.

The injection schedule for Synvisc depends on the joint into which the injection is made.

  • Osteoarthritis of the knee joint: the recommended treatment regimen is 3 injections of 2 ml into the knee joint with an interval of 1 week between injections. To achieve maximum effect, all 3 injections are required. The maximum recommended dosage regimen is 6 injections over 6 months with a minimum interval of 4 weeks between courses of treatment.
  • Osteoarthritis of the hip, ankle, shoulder joint: the recommended initial treatment regimen is 1 injection (2 ml). However, if adequate symptomatic improvement is not achieved after the injection, it is recommended to prescribe a second injection (2 ml). Clinical evidence suggests that patients benefit most from the second injection when administered 1 to 3 months after the first.

The effect of Synvisc applies only to the affected joint. Synvisc does not have a general effect. Typically, the duration of action of Synvisc in patients who responded to treatment was up to 26 weeks, although both shorter and longer periods were observed. However, prospective clinical data from patients with knee osteoarthritis demonstrated treatment effectiveness of up to 52 weeks after one course of 3 Synvisc injections (reduction of pain, stiffness in the knee joint and improvement of its function).

Contraindications

  • Synvisc should not be administered if there is venous or lymphatic stasis of the limb on the side of the affected joint.
  • Synvisc should not be injected into an infected or severely inflamed joint, or in patients who have skin lesions or signs of infection in the immediate vicinity of the injection site.
  • Do not administer intravascularly (inside blood vessels).
  • Cannot be administered extra-articularly, incl. into the synovial tissue or joint capsule (adverse effects may occur, usually at the injection site).
  • Do not use together with skin disinfectants containing quaternary ammonium salts (in their presence, hyaluronan may precipitate).
  • Individual intolerance to the components of the product

special instructions

The drug should not be administered in the presence of significant intra-articular effusion.

As after any invasive procedure in the joint, after injection of the drug the patient is recommended to adhere to a gentle regimen, gradually restoring normal physical activity over several days.

The drugs have not been studied in pregnant women, children and adolescents under 18 years of age.

Storage conditions

At 2–30 °C (do not freeze). Keep out of the reach of children.

Note

Medical product. Consult a doctor before use!

Do not use alone. The injection of drugs into the joint should only be carried out by a specialist with the appropriate skills!



Random articles

Up