What to do to increase Internet speed. And so let’s begin to solve the question: How to speed up the Internet. Browser acceleration mode

In this article we will look at how to increase the speed of your home WI-FI network. Currently, wireless access to boarding schools is the norm for most Russians. The technology provides a single connection source for all devices in the home. Given the trend of increasing devices that require a constant and stable Internet connection (Internet of Things), speed, or more precisely, methods for optimizing the network, are becoming a very pressing problem. Below we will talk about several simple solutions that allow you to increase Internet speeds without changing your provider or switching to a more expensive tariff.

One of the best solutions is to use the latest signal transmission and reception devices. Routers that distribute the Internet. The transmitters that help them. Smartphones, laptops and tablets that receive the signal. For example, let's say that the iPhone X provides a significantly faster Internet connection compared to the iPhone 5, this is due to the presence of a more advanced communication module in the first one. When purchasing a new device, take into account the fact that a new one a priori receives a signal better than an old device, especially one that has been in use for a long time.

Check the standard your device uses. On Windows this can be done in the following way:

Method 2. Noticeable

Sometimes Wi-Fi routers can look terrible, but that doesn't mean that the best place for such a device is deep in the closet or far behind the sofa, by the way, which is why the design of the router is as important as its technical characteristics.

If you want to achieve a good Internet connection, place the router in a visible place - in the middle of the room, for example. In addition, place the antennas (if available) perpendicular to each other. A good solution would be to “nail” the router to the wall of the same room where the main receiving device is located, and it does not matter whether it is a stationary PC or a portable tablet. In the latter case, consider how often you use the device in a given location.

Of course, the location of the router is determined mainly by where it will be convenient to connect the ethernet cable to it. So take this into account when initially wiring the latter.

Method 3. Correct

Read the best ways to strengthen your Wi-Fi signal in the new article -

The Wi-Fi router operates with a fairly large number of wireless channels, which in some cases can lead to problems. Let's look at one of these. Let's say you have neighbors who, like you, have a WI-FI connection. Let’s also assume that you have several such neighbors. In a situation like this Internet hostel, your neighbor’s connection is quite likely on the same transmission channel as yours and a couple of others.

On a note! In order to change the channel to a freer one, you need to manually select a data transmission route with the least number of “clients” and, accordingly, with the least delay time.

To do this, do the following:

Step 1. Determine the load on the data transmission channel. To do this, you can use the inSSIDer program on Windows or Network Analyze on iPhone. The network load on your phone will look like this.

Step 2. We change the channel on the router (router). Let's assume that, like most Russians, you are the happy owner of a router from TP-Link.

For those who use a D-Link brand router:

Method 4. Accusatory

A fairly common case is when the normal transmission of data by your router is interfered with by other devices that are in close proximity to it. Such devices can be a microwave oven or a handset of a mongrel telephone.

Remove your router from the kitchen, remove the phone from the router and finally determine for the latter “its place”, in which no other device can interfere with its work.

Method 5. Protective

Make sure that you are the only user of the network and that no one else is using it without express permission. There are many ways to ensure the security of your Internet connection. The most obvious ones include: setting a password and setting the “correct” password. In addition, you can come up with a unique name for your network (SSID). Call it something like petya-virus.exe, this should reduce attacks on your Wi-Fi by inexperienced users.

You can change the SSID in the following way.

On TP-LINK routers:

On Asus devices:

On D-Link routers:

Method 6. Radical

To increase the coverage area and signal intensity, you can purchase so-called Wi-Fi signal repeaters or amplifiers. Poke into each socket (one per room will be enough) and be sure that the slow speed is the work of the provider, not yours.

Thus, we talked about basic ways to increase the speed of your home Internet network. In the vast majority of cases this should be quite sufficient.

Video - How to increase Internet speed to the maximum

1. First, you need to measure your current connection speed.

2. Increase bandwidth by asking Windows to use the entire communication channel:

Go to the Start menu - enter "gpedit.msc" in the search

3. Go to the menu Computer Configuration - Administrative Templates - Network - QoS Packet Scheduler - Limit Reserved Pro-Russian Capacity.

4. Set the toggle switch to “Enable” and check that the bandwidth limit is 20%.

5. Go to Start - type “regedit” in the search box - Enter.

6. In the window that opens, go to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DNScache\Parameters

and add the following lines to it (right-click on the empty field - New - DWORD value (32 bits)):

• CacheHashTableBucketSize
• CacheHashTableSize
• MaxCacheEntryTtlLimit
• MaxSOACacheEntryTtlLimit

7. Set the following parameters to the newly created files:

• CacheHashTableBucketSize - set value to 1
• CacheHashTableSize - set value to 384
• MaxCacheEntryTtlLimit - set the value to 64000
• MaxSOACacheEntryTtlLimit - set value to 301

To do this, hover your mouse over each item and right-click - Edit.

8. Start - in the search bar, enter "cmd" - Enter.

9. In the command line that opens, write:

netsh interface tcp set global autotuninglevel=disabled

press Enter and restart your PC.

To change the value back, run the command line again and enter the value:

netsh interface tcp set global autotuninglevel=normal.

All these steps will help you increase your Internet speed.

Internet speed almost never matches the parameters stated in the provider's tariff. The reduction in data transfer speed over the network is influenced by many third-party factors, some of which can be neutralized yourself.

The speed of the Internet connection depends on the connection conditions of the tariff plan, the operation of the equipment and receiver devices.

Why is the data transfer over the network lower than specified in the tariff plan?

Problems with the provider

When connecting an Internet cable directly to a device (computer/laptop/Smart TV), the connection speed is regulated directly by the provider’s equipment. Therefore, the parameters specified in the tariff must completely coincide or differ slightly from the data (for example, if the declared speed is 100 Mb/s, the client receives 80-100 Mb/s).

If browser pages are loading slower than usual, the problem lies directly with the telecom company.

Connection via Wi-fi router

Unlike connecting the cable directly, the router acts as an intermediary in data transfer. When processing and transmitting data to them, the overall speed indicator is lost.

The more powerful the router, the faster it processes and relays the signal. But the speed in any case drops by half/third of the total flow.

Irregular operation of receiver devices

Sometimes the speed of the Internet connection is not related to the performance of the provider or equipment. The reason is the slow operation of the receiving device - computer, laptop, phone.

The problem lies in the gadget’s full RAM, a large number of open applications or programs that receive information from the network in the background.

How to check Internet speed on a Windows 7 computer?

This method is suitable for monitoring speed indicators on versions of Windows 7, 8 and 10:

A more popular way of checking is the Internetometer service from Yandex with simple functionality:

Another well-known service for checking speed without leaving the browser is the international resource Speedtest. More details about working with it are shown in the video.

Video - testing Internet connection speed using Speedtest

How to increase Internet speed through a Wi-fi router?

Sometimes a reboot is required to restore normal operation of the router. To do this, you need to turn off the electronic device from the network for a couple of minutes. When you turn it back on, you can press the “Reset” key.

If this doesn't help, try changing the range of the router. Sometimes it coincides with the frequency of other radio devices in the room - a wireless camera, phone, etc. the standard value is 2.4 GHz. Some modern models can be switched to 5 GHz.

Check what percentage of output power is set in the router settings - perhaps it was initially programmed to work incompletely:

The setup data is presented based on the Asus RT-N12E router model. Depending on the manufacturer or model, the configuration features of other routers may vary.

How to increase Internet speed on a computer or mobile device?

Later versions of the Windows operating system automatically set the speed limit. By removing it, you can speed up data transfer:

Save the new settings and reboot your device.

It would be a good idea to check the Task Manager for the presence of background applications. Some of them use networks to maintain functionality by diverting traffic needed elsewhere:

Important! In some types of operating network, you must additionally click “Processes” and then “Network” in the window that appears before the list appears.

Close those programs that usually use the Internet and are not needed at the moment. If you doubt how closing a program will affect the operation of your computer or your future work on the device, it is better to leave it turned on.

Boost your phone

Cleaning up unnecessary files and clearing the cache will help speed up your work in Internet applications on your phone. To do this, you need to download the free CC-Cleaner or CleanMaster application - the programs are similar to each other.

Both applications have an intuitive interface that is clear from the first opening. With their help you can perform the following actions:

• scanning the device for debris;
• quick cleaning;
• deep cleaning of the device;
• clearing cache.

In addition, closing background applications allows you to unload your smartphone to speed up processing of the World Wide Web.

How to improve Internet speed using software?

The Auslogics BoostSpeed ​​computer extension further speeds up the throughput of the device on which it is installed. The free version can be downloaded from the Internet - installation is carried out in the standard way.

After you restart Windows, the Internet on your device should start working faster.

Periodic computer hygiene will constantly maintain optimal device throughput and normal Internet speed.

Checking connected devices

The Internet works slower if several devices are connected to it at once (laptops, tablets, smartphones).

Those who constantly download media files (video, audio, images) need especially a lot of traffic.

Regular antivirus scanning

The overall speed of a device directly affects its performance with Internet applications. Therefore, it is necessary to periodically (preferably once a week) check the system for the presence of malicious virus programs.

Removing unnecessary toolbars

Often, browsers accumulate a lot of unnecessary functions, buttons, and transitions that overload its work and affect the operation of web pages.

It is recommended to remove unnecessary hotkeys and browser extensions.

Clearing browser cache

Cache is the browser’s conditional memory, in which the remains of downloaded pages, files, and applications accumulate. A full cache prevents you from fully surfing the Internet, so don't forget to clear it.

Disabling background applications

Some extensions needed to bypass various blocks (for example, VPN) are best disabled during non-working hours. They take away excess traffic.

Change browser

Some browser add-ons are difficult or impossible to remove, which is why the browser starts to slow down over time, regardless of clearing the cache and other actions.

Simply remove it and replace it with a new one. Moreover, diversity allows: Google Chrome, Yandex, Opera, Mozilla Firefox.

Video - How to increase Internet speed

Useful tips

There is nothing worse than slow Internet, which prevents you from enjoying broadcasting a match of your favorite football club or watching an interesting TV series or movie.

If your home Internet is constantly moving at a snail's pace, there are a few tricks that can help you deal with this problem and save your nerves.

Here are 7 simple, but effective and efficient tips that can help you increase the speed of your home Internet:

How to increase your home Internet speed

1. Reboot your modem or router

Often, Internet problems are due to the fact that your router or modem simply needs a normal reboot.

Completely turn off your modem or router by unplugging the power cords from both devices and wait a couple of minutes. Then turn them on again. This seemingly simple trick can really fix your slow Internet problem.

How to increase Internet speed through a router

2. Move the router

We often complain that our router is not working well.

But maybe the whole point is that he is standing in the wrong place? It makes sense that if you put the router somewhere behind the sofa or in some other hard-to-reach place, you are simply blocking the signal and slowing down the WiFi.

The router should be in an open space, so place it on a hill or in a place where the signals will not be blocked by various partitions.

Ideally, it would be to place the router somewhere higher. If this is a private house, then the best option would be an attic or top floor.

How to increase WiFi internet speed

3. Protect your WiFi with a password

Do you live in a densely populated area (such as a large apartment building)? Then it is quite logical that your Internet can be stolen.

If your Internet is not password protected and it suddenly becomes slow, chances are someone is actually borrowing it from you.

Typically, the first sign that someone else is using your WiFi is slow internet speeds.

To avoid this problem, be sure to protect your WiFi with a strong password.

4. Check your Internet bandwidth

Perhaps one of the family members spends most of their time playing games. This habit can slow down your Internet bandwidth.

Some applications, such as video games or streaming services like Netflix and similar services, consume more bandwidth than the same Facebook application.

If this is the case, and the first three methods don't work, note that your router has a tool called Quality of Service (QoS) that you can use to prioritize specific services.

Since every router works differently, be sure to read the manual to find out how to configure QoS specifically for your specific case.

5. Change the channel

Like radios, wireless routers operate on different channels and frequencies. And if your router is set to the same channel as your neighbors, it's quite possible that you'll have a weak signal.

To find the best frequency for your Wi-Fi, use our dedicated How To Geek user guide.

6. Upgrade your hardware

If you have a router that says 2010, of course, you may encounter certain problems. The quality of the Internet will raise some questions.

Remember that to ensure a fast connection, you must work with the latest equipment. Technical progress does not stand still; every year manufacturers release new and more sophisticated routers.

Make sure your router is not so old that it is slowing down your internet speed.

7. Buy an Internet signal booster

If your hardware is up to date, you can expand your WiFi range and in turn its strength by purchasing a dedicated range extender.

As a rule, it is inexpensive, but it perfectly enhances the signal, thereby bringing Internet speed to a new, higher level.

Slow internet is one of the most annoying things in the world. Low connection speed interferes not only with entertainment, but also with work: in addition to problems with watching movies and online games, it interferes with searching for information and downloading files. Is it possible to correct the situation, and how to do it?

You can increase Internet speed in several ways: selecting a suitable tariff and provider, setting up equipment and a specific connection, monitoring resource consumption by various applications, as well as using special programs. Let's look at each of these methods in more detail and figure out what to do in each specific case.

First method: choosing the right tariff plan

The main reason for slow internet is your ISP. It sets a limit on outgoing and incoming speed for each tariff, which cannot be circumvented without additional payment. These numbers can be found in the tariff description and in the contract, and often they are the reason for the slow Internet.

To find out whether the reason for the slow Internet is an inappropriate tariff, it is worth taking measurements on any site to check. The most common and convenient among them is Speedtest.net.

It's easy to handle:

1. Disconnect other devices from the Internet, close all programs that may consume the Internet.
2. Pause browser extensions and VPNs.
3. Go to the site, start testing by clicking on the “Begin Test” button.
4. Wait for the result.

If the obtained value is comparable to the figures in the contract, or differs from them by 10–15%, the reason for the slowness is the tariff plan that does not suit your needs. It is worth switching to a tariff with a different upper limit or changing the operator.

If the connection is slower by 25% or more, then the reason for the connection slowdowns is not in the tariff. It’s worth calling the provider’s hotline and clarifying this information: perhaps the problem arose due to breakdowns or problems with them.

You should also make sure that your tariff does not have traffic restrictions: in such cases, the speed drops sharply as soon as the specified threshold is reached. You can increase it only by paying for additional gigabytes. This method is practiced on the MTS modem, and it is also used by the Megafon modem and other mobile modems with SIM cards. It is also used by the Belarusian operator Byfly.

How to increase the speed of an MTS modem - video:

Is there nothing broken with the provider and the traffic threshold is not set? We are looking further.

Second method: monitoring resource consumption by programs

Another reason for a slow connection is excessive traffic consumption by programs running in the background on the computer. In addition to the browser, other applications can also use the Internet connection, even when you hardly use them.

Such programs include:

• Torrent clients. Both while downloading files and in a calm state.
• Cloud services, especially when synchronizing data.
• Minimized browser, even with a small number of tabs.
• Applications when downloading updates. Operating system - including.

Also, the reason may be a virus; they tend to clog traffic. This is especially true in a situation where the speed was constant and high, and its sharp drop occurred just after installing a new program or downloading a new file. You should scan your computer with an antivirus program to rule out this option.

Finding processes that actively use traffic is not difficult. To do this, you need to open the Task Manager and find the “Performance” tab in it.

Select the Network tab. Activate processes using checkboxes to see how much traffic they use.

When you figure out which applications you don't need at the moment require a lot of Internet, disable them in the task manager. Also check if they are enabled in startup.

You can remove torrent and cloud storage from processes without any problems: in those moments when they do not download files, they only waste resources. But don’t rush to disable system applications! This may cause your computer to malfunction.

Third method: setting up equipment

You can increase your Internet speed if you properly configure and update your equipment for connecting to the global network.

If you use wired Internet, it is worth checking the cable for damage. Outgoing contacts, location near power lines, creases and other defects slow down throughput. If the problem can be fixed, do it. If not, buy a new cord.

If you are a happy owner of Wi-Fi, make sure that its maximum bandwidth suits your needs. You can find this information in the instructions and on the box from the router. To increase speed, update your router's firmware and move it away from batteries and other heat sources. Make sure the router is in a convenient location where your computer can pick up its signal.

Next, update the network card drivers. You can find them on the website of the manufacturer of your laptop or PC. Next, you need to launch the Device Manager: this can be done by opening Computer (This PC in Windows 8 and Windows 10), right-clicking and selecting “Properties”.

Click on "Device Manager". A new window will open in front of you.

Select “Network adapters”, find yours, right-click on it and activate “Properties”.

For a cable connection, find the "Advanced" tab, and raise the "Speed ​​& Duplex" value to maximum. Attention: select the value labeled “Full Duplex”.

When connecting wirelessly, activate 802.11n mode in the “Advanced” tab. Activate WMM support.

Save your changes and exit the manager. If you use Wi-Fi, go to the router's settings panel, go to the "Wireless Network" tab and set the following parameters:

You can only select a broadcast channel at random: depending on the specific device and location, all options manifest themselves differently.

Once you are done, the hardware setup will be completed.

Fourth method: disabling redundancy

Another surefire way to optimize your connection and increase the speed on your laptop or PC is to disable Internet backup. The fact is that by default the system uses about 20% of your traffic as network reserve. You can disable this function by opening the “Run” line and entering the value in it:

Gpedit.msc

The “Local Group Policy Editor” window will appear in front of you. In it you need to open the “Computer Configuration” section. There is a folder “Administrative Templates” and its subfolder “Network”. That's what we need.

This is where the QoS Packet Scheduler/Manager folder is located. It contains a file that needs to be changed to speed up the connection. It's called "Limit Reserved Bandwidth".

Open the file to edit the values ​​within it. Reduce the reservation percentage using the arrows, or by entering the required value manually. We need the number "0". Save your changes.

Reservation disabled. This can increase your internet speed by 15-20%.

Fifth method: searching for violators

If you use a wireless connection and the previous methods did not work to increase the speed of your home Internet, check your network for extraneous connections. There are plenty of free internet lovers around! If the speed drops suddenly and all attempts to speed up the connection fail, the transfer may slow down for this very reason.

Searching and identifying those connected to your Wi-Fi network - video.

To find out if someone else has connected to your Wi-Fi, you need to go to the router settings menu. Enter your username and password - if you have not visited this page yet, the correct value for both items is “admin”. Go to the “Wireless Mode” menu and find the “Wireless Mode Statistics” item in it.

All devices connected to your router are displayed here. If you notice something unfamiliar, you should change the password for your connection in the security settings. Depending on the manufacturer and model, they may be called differently.

Reboot your router and all third-party connections will be reset. If everything is successful, the speed will increase to the normal setting instantly.

From now on, be more vigilant: in most cases, the password is found out through automatic guessing and phishing attacks, so try to use complex combinations and not respond to suspicious windows asking you to enter your password.

Sixth method: third-party accelerator programs

And finally, the last working method that will help increase the speed of your Internet connection: using third-party programs. You can find many similar utilities on the Internet. Let's look at how they work on TCP Optimizer: this is a free application that can add 15-20% to the current speed.

Video on working with the SG TCP Optimizer utility:

To add speed using this program, do the following:

1. Run the program as administrator.
2. Specify the maximum connection speed on the “Connection Speed” scale.
3. Find your device in the “Network adapter selection” list.
4. In the “Choose settings” item, select “Optimal”.
5. Click on the "Apply changes" button. Reboot your device.

After restarting the system, check the Internet operation. The program should strengthen your connection and increase the speed of loading pages and files.

As you can see, it is possible to improve the speed of your Internet connection at home. To do this, you just need to choose the method that suits you and strictly follow the instructions.