Programs that increase Internet speed. Select the fastest DNS server. We identify and strengthen equipment bottlenecks

1. First, you need to measure your current connection speed.

2. Increase bandwidth by asking Windows to use the entire communication channel:

Go to the Start menu - enter "gpedit.msc" in the search

3. Go to the menu Computer Configuration - Administrative Templates - Network - QoS Packet Scheduler - Limit Reserved Pro-Russian Capacity.

4. Set the toggle switch to “Enable” and check that the bandwidth limit is 20%.

5. Go to Start - type “regedit” in the search box - Enter.

6. In the window that opens, go to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DNScache\Parameters

and add the following lines to it (right-click on the empty field - New - DWORD value (32 bits)):

• CacheHashTableBucketSize
• CacheHashTableSize
• MaxCacheEntryTtlLimit
• MaxSOACacheEntryTtlLimit

7. Set the following parameters to the newly created files:

• CacheHashTableBucketSize - set value to 1
• CacheHashTableSize - set value to 384
• MaxCacheEntryTtlLimit - set the value to 64000
• MaxSOACacheEntryTtlLimit - set value to 301

To do this, hover your mouse over each item and right-click - Edit.

8. Start - in the search bar, enter "cmd" - Enter.

9. In the command line that opens, write:

netsh interface tcp set global autotuninglevel=disabled

press Enter and restart your PC.

To return the value back, run the command line again and enter the value:

netsh interface tcp set global autotuninglevel=normal.

All these steps will help you increase your Internet speed.

Are web pages taking longer to load than usual, and file download speeds are not as good as advertised by your provider? This may be due to many factors. Fortunately, there are many tricks that can help you improve the quality of your Internet connection. You will notice the difference within minutes.

Steps

Checking equipment, network status and connection speed

Test your connection speed. Before you go to the hardware and computer settings, check the speed of your connection and compare it with that stated by your provider. There are many sites on the Internet that can help you check your connection speed. Just search Google for "connection speed test" and select one of the first results in the list.

• Different tests will show different results. Even the same test can show several different values ​​when tested repeatedly. The test result depends on the location of the servers and the network load.
• Take several tests and find the average.
• To pass the test, you may need to download and install plugins.
• If the site asks you to select a server to test your connection speed, choose the one closest to your actual location. This way you will get the most accurate result.

1. Compare the test result with the data declared by the provider. Check with customer support to determine what your connection speed should be. Remember that the provider will indicate the maximum possible speed, but the actual speed will not always correspond to this figure.

   • If you haven't changed your data plan in a while, you may be able to get faster speeds for less. Companies typically don't let existing customers know about better deals, so check to see if they've added any new rates since you started using their services. Check out what all providers offer in your area.
   • Remember the difference between megabits and megabytes. There are 8 megabits (MB) in one megabyte (MB), so if you pay for 25 megabits per second (MB/sec), then your maximum speed will be slightly higher than 3 megabytes per second (MB/sec).

2. Reboot your router. Restarting your modem or router can resolve many connection problems. If your modem or router does not have a power button, simply unplug the power cord, wait 30 seconds, and plug it back in. Read this guide to learn how to restart your home network.

   Check for conflicting signals. If you use a wireless router, check to see if it conflicts with your cordless phone or wireless camera. There are two main types of wireless routers: 802.11 b, g, and n (2.4 GHz) or 802.11 a (5.8 GHz). If your cordless phone and router operate on the 2.4 GHz frequency, the Internet connection speed will be slower when someone is using the phone. The same applies to wireless outdoor cameras. Check the signal frequency of your phone and camera. If it is 900 MHz then there is nothing to worry about. If they operate at a frequency of 2.4 or 5.8 GHz, then they are likely interfering with your wireless network.

   Check if you have reached your traffic limit. Many providers set limits on Internet traffic, but do not always notify their customers about this. Log in to your provider's website or contact customer support by phone and check if you have reached your monthly limit. Usually, after exceeding the limit, the provider limits the connection speed.

   Call your provider's customer service line. Sometimes only your provider can fix a connection problem. Usually, to establish the causes of problems, a technician does not need to come to your home. You may be prompted to restart your router again.

   Check all devices on your network. If other users on your network frequently download data from the Internet, such as watching videos online or downloading large files, this may take up a significant portion of the network bandwidth.

   

   Reduce the distance between the router and computer. If you are connected to the Internet using a Wi-Fi router, the reason for the slow connection speed may be a weak signal. Place your computer and router as close to each other as possible, or place the router on a cabinet to improve signal quality.

   • Clean any dust from your router or modem using a can of compressed air. This will protect it from overheating and increase the stability of its operation.
   • Provide good ventilation to all electronic components to prevent overheating.

3. If you use DSL technology, check your splitter. A splitter is a small box into which your landline phone cable is connected. On the opposite side there are two sockets - one for the phone, the other for the modem. If you are connected to the Internet via a landline telephone line, in order for the connection quality to be good, you must have a high-quality splitter installed.

   Check the weather forecast. If you use satellite Internet, your connection speed may fluctuate due to wind, snow, rain, lightning, static fields and other meteorological phenomena.

   Optimizing your computer and network

   1. Scan your computer with an antivirus at least once a week. Viruses can not only create the threat of leaking valuable information, but also seriously affect the speed of the Internet connection. Protecting your computer from virus threats plays an important role in ensuring a good quality Internet connection.

      • Your computer should always be protected by an antivirus program, especially if you use the Internet frequently. It can be installed for free. There is no need to install more than one antivirus program, otherwise they will conflict with each other.

   2. Remove unnecessary toolbars. If you have many toolbars installed in your browser, they can significantly slow down your connection. By getting rid of these panels, you will speed up your browser and protect yourself from leaks of your personal information.

      • Sometimes it can be difficult to remove some toolbars. To do this, you may need the anti-spyware programs listed in the previous step.

   3. Change your browser. If your old browser is overloaded with difficult-to-remove add-ons and is too slow, you may need to start using a different browser. Firefox, Chrome and Opera are faster than Internet Explorer.

   4. Clean up your hard drive. If you don't optimize your hard drive, it can slow down your computer, and this will affect everything you do, including surfing the Internet. Optimizing your hard drive will only take a few minutes, but it will significantly improve the quality of your web surfing.

      • Defragment your hard drive regularly. Recent versions of Windows do this automatically.
      • To clear your disk of temporary files that may be slowing down your browser, perform a disk cleanup.
      • Make sure that there is at least 15% free space on the system partition of your hard drive. If your disk is full, programs, including your Internet browser, will start and run more slowly.

   5. Check which programs are consuming traffic. Often the connection speed is reduced because the connection is being used by other programs. To find out if any programs are accessing the Internet without your knowledge, you need to use the Command Prompt. Press the keyboard shortcut ⊞ Win + R to open the Run dialog box. Type cmd and click ↵Enter. (For Windows 7 - open the Start menu>All Programs>Accessories, right-click on Command Prompt and select "Run as administrator" from the menu).

      • Enter the command netstat -b 5 > activity.txt and click ↵Enter. A list of programs that use the Internet connection will appear on the screen. After a minute or so, press Ctrl + C to complete the scan. The system will create a file with a list of all active Internet connections.
      • Enter activity.txt and click ↵Enter to open the file and view a list of programs.

   6. Close all unnecessary programs. Press Ctrl + Alt + Delete keys simultaneously and launch Task Manager. Go to the processes tab and disable all programs that may consume traffic. (Note: Interrupting processes with unknown names may cause programs to crash.)

      • View the process data in the "User" column. If the process is running as System, stopping it may cause other programs to crash and you will have to restart your computer. If your username is listed, terminating the process will likely not affect other programs or processes. Sometimes the system prohibits ending an important system process or automatically restarts it.

   7. Change Wi-Fi channel. If many people in your home share the same channel, your Internet connection speed may be slower. To detect free channels, use the inSSIDer application for PC and the KisMAC or WiFi Scanner applications for Mac. By switching to a less busy channel, you will get rid of network interference and will likely be able to access the Internet faster.

      • If you find an unused channel, switch to it to improve your connection speed. If you don't know how to change the wireless channel on your router, refer to the user manual or help materials on the device manufacturer's website.

However, there are things that have not changed since the advent of the Internet - speeding up the Internet and optimizing traffic. The problem is that despite the fact that in large cities there are no problems with speed, since leased lines, high-speed ADSL, and 3G are used, the situation in the regions has not changed much. For example, ADSL with a speed of 128 Kbps costs the same as a leased line with a speed of 70 Mbps in Moscow. This forces people to look for ways to speed up the Internet.

So, increase internet speed can be divided into active And passive way. The active method includes direct changes to device and operating system settings using programs or by editing the registry. Passive ways to increase Internet speed include selecting and configuring a browser, setting up a firewall, etc. We will look at all these methods in this article.

Active ways to speed up the Internet

Let's start free Internet acceleration with optimization the operating system itself. The most common operating system used by users, Windows XP Pro, has a small loophole. A service appeared in Windows XP QoS(Quality of Service). This service is used for specific functions and is not needed by most users. The fact is that QoS reserves 20% of the channel bandwidth for its tasks. In addition, you need to take into account that it doesn’t matter what channel you have - regular Dual Up or Gigabit Ethernet - 20% is reserved for QoS.

So, first of all, we need to disable this service to free up the channel and increase Internet speed. To do this, let's go to Start ->> Execute, dial msconfig. In the menu that appears, select the tab Services, and look for QoS RSVP in the list. Then we turn it off.

However, that's not all. Now let's launch the applet Group Policy, for this in Start ->> Execute dialing gpedit.msc, then select Local Computer policy, and then Administrative templates. After that, select Network - QoS Packet Sheduler. In this menu we disable Bandwidth limit, or reduce from 20% to 0. But we did not completely disable QoS. Now let's go to device Manager, select “Show hidden devices”, and there we delete QoS devices. I want to make a reservation right away that many people say that QoS is a myth. Then check the ping with QoS enabled and disabled - you will see right away. And keep in mind that in order to completely disable channel reservation, you need to follow all the steps.

Now, or modem, set the MTU value to 1492. This value is optimal for ADSL or a leased line. For a regular Dual Up modem, it is better to set the value to 576.

Basically, we have done everything to optimize the operating system to increase Internet speed.
Now let's get to the software. To increase Internet speed, various programs are used that perform various functions. For example, these are programs - firewall monitors, which not only protect against hacking and information leakage, but also allow you to increase Internet speed. There are also programs that allow you to compress information on a third-party server. Perhaps, let's start with firewall monitors or, in common parlance, a firewall.

A firewall helps protect your computer from unauthorized access. However, it does have features that can speed up your internet. Such functions, for example, include blocking pop-up elements, advertising, and similar unnecessary nonsense that slows down the site loading speed. The fact is that many graphic elements have a lot of weight. As a rule, the creation of banners is undertaken by beginners and non-professional designers, who are even capable of making mistakes in advertising banners. Of course, there is no question of image optimization. As a result, the images on the banners are quite large. Loading image data takes a long time. As you understand, this slows down the site loading speed. Yes, there are browser plugins that help get rid of banners - banner cutters. However, these plugins have many disadvantages, while you can configure the firewall to the smallest detail.

So, let's look at setting up a firewall based on Agnitum Outpost. Agnitum Outpost is one of the best firewalls. Let's skip the security settings and go straight to the Outpost settings to speed up the Internet. So, first of all, we set up ad blocking. To do this, enter the text that most often appears in banners and advertisements. Outpost has an extensive database of templates that you can use without any problems. In addition, you can customize the sizes of the images that will be blocked. This menu contains all banner sizes, so setting up this parameter will not take much time.

After setting up mail blocking, you can set up blocking of additional elements, such as Active X or Pop-Up.

We got rid of unnecessary images that slow down loading. Now the couple will use another program - now we will compress traffic.

So, there are a large number of programs to compress traffic. These programs work as a proxy server. They contact servers, which in turn compress traffic (35% - 70%). Accordingly, you save on traffic and page loading speed increases. Not only text information is compressed, but also graphic information.

However, almost all programs of this type are paid. Free programs include: Toonel. Please note that this program requires a Java virtual machine to run. You can make sure that it is there at the address - C:ProgramFilesJava. If not, then simply download it from the address - http://java.com/ru/download/windows_xpi.jsp?locale=ru and download the program. After that, we install Toonel and start configuring it.

Toonel allows you to compress traffic not only on a local server, but also on a remote one. Depending on the required option, we configure the program. In the example, we will focus on the local proxy server option:

hostname: 127.0.0.1
localport: 8080
web interface port: 7999
Don't forget to set JPG compression.

Now you need to configure the programs whose traffic you are going to compress. Let's look at the example of a browser. Go to the proxy server settings and enter the data that you configured in Toonel.

After which the program begins to compress traffic. For traffic to be compressed, the program must run constantly. Other programs whose traffic needs to be compressed are configured in a similar manner...

That's the end of active ways to speed up the Internet. Now let's move on to the passive.

Passive ways to speed up the Internet

Passive ways to speed up the Internet include only setting up your browser. Moreover, you can only configure Opera 10, for everything else you need to do all the steps described above. Firefox itself does not compress traffic, Opera, up to version 10, compresses it slightly. All you can do with these browsers is disable images. However, this feature should not be enabled, since many sites are not laid out correctly and simply do not load without images, or the text is invisible. Therefore, turning off images does not lead to the desired effect.

However, Opera 10 has a new option - Turbo. This option is similar to Toonel. So if you plan to use Opera 10, you don’t have to install Toonel.

In this article, we looked at the main free ways to speed up the Internet. And everyone will decide for themselves how to speed up their network. The choice is yours.

Almost every user wants the speed of his computer’s connection to the World Wide Web to be as high as possible. This issue is especially relevant for low-speed data networks, where, as they say, every KB/s counts. Let's find out how to increase this indicator on a PC running Windows 7.

It should be noted right away that it is simply impossible to increase the Internet speed parameters beyond those that the network bandwidth can provide. That is, the maximum data transfer speed announced by the provider is the limit above which you cannot jump. So don’t believe various “miracle recipes” that are supposedly capable of speeding up the transfer of information significantly. This is only possible when changing providers or switching to another tariff plan. But, at the same time, the system itself can act as a certain limiter. That is, its settings can reduce bandwidth even below the level set by the Internet operator.

In this article, we will explain how to configure a Windows 7 computer so that it is able to maintain a connection to the World Wide Web at the highest possible speed. This can be done either by changing certain parameters within the operating system itself, or by using some third-party programs.

Method 1: TCP Optimizer

There are a number of programs that are designed to optimize the settings for connecting your computer to the World Wide Web, which, in turn, leads to an increase in Internet speed. There are quite a few such applications, but we will describe the actions in one of them, which is called TCP Optimizer.

Method 2: NameBench

There is another application to speed up the speed of receiving data from the network - NameBench. But, unlike the previous program, it does not optimize the computer settings, but searches for DNS servers through which communication will be as fast as possible. By replacing existing DNS servers in the connection properties with those recommended by the program, it is possible to increase the speed of loading sites.

1. After downloading NameBench, run the installation file. It is not necessary to have administrative rights. Click "Extract". After this, the application will be unpacked.



2. In field "Query Data Source" the program itself selects the browser that is most suitable in its opinion, which is installed on this computer, for testing. But if you wish, by clicking on this field, you can select any other web browser from the list. To start searching for DNS servers, click "Start Benchmark".



3. The search procedure is in progress. It may take a significant amount of time (up to 1 hour).



4. After the test is completed, the browser that is installed on your computer by default will open. On his page, the NameBench program is in the block "Recommended configuration" will display the addresses of three recommended DNS servers.



5. Without closing the browser, perform the following manipulations. Click "Start", sign in "Control Panel".



6. In the block "Network and Internet" click on the position "View network status and tasks".



7. In the window that appears "Network Control Center" in the parameter group "Connect or disconnect" click on the name of the current network, which is listed after the parameter "Connection".



8. In the window that appears, click "Properties".



9. After launching the window in the component block, select the position "TCP/IPv4". Click "Properties".



10. In the window that appears in the section "Are common" Scroll to the bottom of the options. Set the radio button to position "Use the following DNS server addresses". The two bottom fields will become active. If they already have some values, be sure to rewrite them, since some operators only work with certain DNS servers. Therefore, if, due to further changes, the connection to the World Wide Web is lost, you will have to return the old addresses. In field "Preferred DNS Server" "Primary Server" browser. In field "Alternate DNS server" enter the address that is displayed in the area "Secondary Server" browser. Click "OK".

After this, the Internet speed should increase slightly. If you cannot access the network at all, return the previous DNS server settings.

Method 3: Set up a packet scheduler

The value of the parameter being studied can be increased by changing the packet scheduler setting.

1. Call the remedy "Run", applying Win+R. Enter:

   Click "OK".



2. A window opens "Local Group Policy Editor". In the left area of ​​the shell of this tool, expand the block "Computer Configuration" and click on the folder name "Administrative Templates".



3. Then move to the right side of the interface and click on the folder there "Net".



4. Now enter the directory "QoS Packet Scheduler".



5. Finally, after going to the specified folder, click on the item "Limit reserved bandwidth".



6. A window opens with the same name as the item we previously clicked on. In the upper left part of it, set the radio button to the position "Turn on". In field "Bandwidth Limit" be sure to set the value «0» , otherwise you risk not increasing the speed of receiving and transmitting data over the network, but, on the contrary, reducing it. Then click "Apply" And "OK".



7. Now you need to check whether the packet scheduler is enabled in the properties of the network you are using. To do this you need to open a window "State" current network. How this is done was discussed in Method 2. Click on the button "Properties".



8. The properties window for the current connection opens. Make sure that opposite the item "QoS Packet Scheduler" the checkbox was checked. If it is standing, then everything is in order and you can just close the window. If there is no checkbox, check it, and then click "OK".

After this, you will most likely receive some increase in your existing Internet speed.

Method 4: Setting up a network card

You can also increase the speed of your network connection by adjusting the power supply of your PC's network card.

1. Navigate using the menu "Start" V "Control Panel" just like we did above. Go to the section "System and safety".



2. Next in the settings group "System" go to item "Device Manager".



3. Window opens "Device Manager". On the left side of the window, click on the item "Network adapters".



4. A list of network adapters installed on the computer opens. This list may contain one element or several. In the latter case, you will have to perform the following operations with each adapter in turn. So, click on the name of the network card.



5. The properties window opens. Move to the tab "Power Management".



6. After the corresponding tab is open, check the checkbox next to the item "Allow the computer to turn off this device". If the mark is present, it should be removed. Also, if available, uncheck the box "Allow this device to wake the computer from sleep mode", if, of course, you have this item active at all. Click "OK".



7. As mentioned above, perform this operation with all elements that are located in the group "Network adapters" V "Device Manager".

If you are using a desktop computer, there will be no negative consequences after applying these steps. The function of waking up a computer from sleep mode using a network card is used very rarely if you need, for example, to communicate remotely with a switched off computer. Of course, when you deactivate the ability to disable the network card when it is not in use, power consumption increases slightly, but in reality this increase will be minimal and will have almost no effect on the level of power consumption.

Important: For laptops, disabling this function can be quite significant, since the rate of battery discharge will increase, which means the period of operation of the device without recharging will decrease. Here you will need to decide what is more important to you: a small increase in Internet speed or a longer operating time of the laptop without recharging.

Method 5: Change the power plan

You can also achieve a certain increase in the speed of data exchange with the World Wide Web by changing the current power plan.

The fact is that in economy mode or in balanced operation mode, the supply of electricity to the network card, as well as to other system components, is limited. By performing the above actions, we thereby remove these restrictions and increase the performance of the adapter. But, again, it is worth noting that for laptops, these actions are fraught with an increase in the rate of battery discharge. Alternatively, to minimize these negative effects when using a laptop, you can switch to a higher performance mode only when directly using the Internet or when the device is connected to an electrical outlet.

Method 6: COM Port Extension

You can also increase the connection speed on Windows 7 by expanding the COM port.

Thus, the port capacity will be increased, which means the Internet speed will also increase. This method is especially useful when using high-speed networks, when the provider provides a higher connection speed than what the computer’s COM port is configured for.

You can also give some general tips that will improve your Internet speed. So, if you have the choice between a wired connection and Wi-Fi, then choose the first one, since a wired connection operates with less loss than a wireless one.

If it is not possible to use a wired connection, then try to place the Wi-Fi router as close to the computer as possible. If you are using a laptop that is not connected to the mains, then, on the contrary, you can position it closer to the router. Thus, you will minimize losses during signal transmission and increase Internet speed. When using 3G modems, place the computer as close to the window as possible. This will allow the signal to pass as freely as possible. You can also wrap the 3G modem with copper wire, giving it the shape of an antenna. This will also provide a certain increase in data transfer speed.

When using Wi-Fi, be sure to set a password for the connection. Without a password, anyone can connect to your point, thereby “taking” part of the speed for themselves.

Be sure to periodically, using not the standard antivirus, but specialized utilities, for example. The fact is that many malicious programs use the computer to transfer data to its “master” and other manipulations through the network, thereby reducing the connection speed. For the same reason, it is recommended to disable all unused toolbars and plugins in browsers, since they also transmit and receive information that is often useless to the user through the network channel.

Another option to increase your target is to disable your antivirus and firewall. But we do not recommend using this method. Of course, antiviruses somewhat reduce the speed of receiving data by passing it through themselves. But by disabling the protection tools, you risk picking up viruses, which in turn will lead to the opposite of the desired effect - the Internet speed will decrease even more than with the antivirus program turned on.

As you can see, there is a fairly wide range of options to increase Internet speed without changing your tariff plan and provider. True, you shouldn’t delude yourself. All these options can only provide a relatively small increase in the value of this indicator. At the same time, if you use them in combination, and not limit yourself to using any one method, you can achieve significant results.

The efficiency of a computer depends on its characteristics and the speed of the Internet. Its value affects the time it takes to open pages and load information from sites. To understand how to increase the speed of the Internet, it is necessary to clearly understand the entire complex of technical means and programs that affect the throughput of the signal receiving channel. The main influencing factors are the maximum speed provided by the provider, the length of the cables before and after the router, its bandwidth, the characteristics and programs of your computer.

Checking connection speed and network status

Before you start checking your connection speed, you need to find out the characteristics of receiving and transmitting information provided by your provider according to your tariff plan. These values ​​are indicated in the agreement for the provision of information services, or are located on the provider’s website on the page describing the characteristics of different tariffs. Please note that sending information to the network is faster than downloading. Provider companies indicate the maximum value of these two data in their tariff plans.

Internet connection speed testing

The easiest way to check connection speed is to use special programs and websites. One of the most common is the speed test site speedtest.net. When you open a page at this address, a window with a “Begin test” button appears on the screen. After clicking this button, the site initiates sending a ping (ping signal) to the server closest to you and measures the speed of transmission and reception of the signal from the server. By clicking on the prism-shaped picture in the center of the screen, the test can be repeated with a change of control server.

Rebooting the Router

A frequent disruption to signal reception is a failure in the protocols of routers (or routers). This effect can appear when there is a short-term disruption of contact or the influence of some external electromagnetic interference on the information transmission channel. To solve this problem, you need to briefly turn off the router. After turning it on and establishing communication with the server, the connection may be restored.

Conflicting signals

If you are using Wi-Fi to receive your signal, be aware that there may be a delay in receiving information due to other wireless networks and routers nearby. Most older routers operate at a transmission frequency of 2.4 GHz. More modern routers use the 5 GHz channel. In this case, the channel for receiving and transmitting information on the air is used alternately by all routers whose coverage areas are located near you. Increasing Internet speed in such a situation is only possible by purchasing a new router with a 5 GHz channel.

How to increase internet speed

There are several ways to add Internet speed on your computer. If you try to load a site you frequently use in different browsers, you will notice loading differences. The fastest today are Google Chrome, Mozilla Firefox, Opera and Yandex.Browser. The last two have a turbo acceleration mode for loading sites on a slow connection. Network speed may depend on the traffic-consuming software installed on your computer.

Checking your computer for viruses

One of the most harmful programs is viruses. These are programs that are developed specifically to create large and small problems in the operation of personal computer software. Many of them have the ability to steal saved logins and passwords for websites and financial applications from computer memory. You can get virus programs by downloading information from the Internet, viewing photos and video content from unfamiliar sites, receiving and reading letters received from unreliable sources.

Removing malware or adware

Computer software is protected by anti-virus programs, the task of which is to identify attempts to intrude on the computer, determine the type of virus, and create obstacles for infection by it. Companies that produce antivirus programs collect and study all the viruses on the network, and create ways to combat them. The most famous antiviruses are Kaspersky Lab, Dr.Web, ESET NOD 32, 360 Total Security.

Browser update

Regularly updating all software can significantly affect the speed of your computer. This applies to the operating system, video plugins, and browser updates. The performance of different versions of browsers differs for each operating system. It's worth trying and choosing a fast browser for your computer. While surfing the web, users find interesting web resources and save them to Bookmarks. When updating browsers, all basic user settings, saved logins, passwords, and bookmarks are saved.

Cleaning the hard drive

The speed of receiving and saving information from the network depends on the writing and reading speed of your hard drive - hard drive. There may be service files left on it, the removal of which requires optimization and disk cleanup. System utility utilities have a defragmentation function, the regular execution of which can organize the location of files on the disk. This utility collects pieces of files throughout the disk and compiles whole fragments from them, then whole files are assembled from the fragments.

Cache optimization

Modern operating systems load programs into the cache to speed up the work of frequently used programs. The browser cache is a reserved portion of RAM or hard drive memory. Browsers recommend the average value, which is suitable for most programs running. It makes sense to reduce the cache size in the browser settings only when performing the same type of operations on the computer.

Disabling unnecessary programs that consume traffic

If you open the Settings tab in Windows 10 -> Network & Internet -> Data Usage -> Usage Details, the user will be able to assess which applications are actively consuming traffic. To speed up the work, these programs can be disabled and their automatic updating limited. If the Internet is slow, you can limit update downloads and traffic consumption by the system itself by setting a limited connection type: Settings-> Network and Internet -> Wi-Fi->Advanced settings-> set as a metered connection.

Changing the Wi-Fi router channel

Wireless connections on cheap routers for the mass consumer operate in the 2.4 GHz range at maximum frequencies of up to 300 Mbit per second. In this case, the nominal speed is reduced by 2-3 times due to settings and other factors. If there are conflicting WiFi signals, it is worth purchasing routers or repeaters that work with WiFi protocols: 802.11g, 802.11n, 802.11ac, which have speeds of up to 1000 Mbit/s, automatic switching between frequency ranges 2.4 GHz, 5 GHz. High-quality WiFi signal transmission equipment is produced by ASUS, Totolink, and Netgear.

How to speed up the Internet on Windows 7, 8 and 10

To speed up work in Windows, the following manipulations with the operating system and additional programs can help:

• removing network connection bandwidth restrictions;
• setting up reserved bandwidth;
• optimization of equipment operation;
• speeding up the Internet by choosing a fast DNS server;
• using programs to speed up connections;
• installation of the TCP Optimizer utility;
• launching the Internet Speed ​​Booster application;
• using the Proximodo program.

Increasing network connection throughput

In order to improve your Internet connection through settings in the network connection bandwidth, you must perform the following steps:

1. Open Computer Properties->Hardware tab->Device Manager.
2. Find the Ports item and press the down arrow.
3. Select the Serial port (COM1) item and open its properties.
4. Select the port parameters item and set the speed higher than the specified one.
5. Click OK.

Setting up reserved bandwidth

The Windows operating system has a QoS Reserved Bandwidth Limit system that specifically limits your traffic for its service applications. The width of this channel is about 20 percent of the maximum speed. To reduce the ability of the QoS packet scheduler to limit the rate, you need to reduce the reserved channel width in Windows to zero and receive 100% of the traffic. You should do the following:

• Start->Run, type the word regedit, press Enter.
• In the Registry Editor, go to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft.
• Create a new key called Psched.
• Create a new DWORD value and name it NonBestEffortLimit.
• To disable channel reservation, set the NonBestEffortLimit key to 0.

How to increase home Internet speed by optimizing equipment operation

The speed of loading files and pages in the browser depends on many factors - hardware performance and its settings. When checking the entire system for obtaining information, you should carefully review all possible nodes that may affect the speed. When using satellite Internet, the connection is affected by wind, snow, rain, and other meteorological phenomena. In order to speed up the Internet on a computer, it is necessary to optimize the operation of the entire provider-browser system, check the quality and settings:

• network cables;
• router (router);
• network cards;
• Internet connection settings, DNS server selection;
• install special programs to increase speed.

Network cables

Connection speed may vary depending on network cables. Twisted pair cable is used for this purpose. Home Internet distribution is done from the roof of the house or attic. The length of the network cable from the provider's distribution box to your router should not exceed 50 m. It is necessary to ensure that there is no mechanical damage to the cable and that there are power electrical wires and cables running near it that can induce strong electromagnetic fields. When using wired Internet, the distance from the router to the computer should be no more than 10 m.

Optimizing router performance

You should start setting up your router by determining its model and version number. On the manufacturer's website in the support section, select your model and download the router firmware update. You will need to find the router's default gateway or IP address to access the router's web interface:

• From the Start menu, enter cmd in the search field, and enter ip/config/all in the command line.
• Enter the default gateway or IP address into your browser's address bar. Press Enter, the web interface will appear in the web browser window.
• The option to update the router will be in the Administration section called Update or Upgrade firmware.
• Locate the firmware update file you just downloaded.
• Click Update and wait for the firmware update process to complete.

Most people surf the net looking for multimedia files. To speed up this process, an additional standard, Wi-Fi Multimedia (WMM), was developed. Users must check the “WMM Enable” box in the router settings. You should activate this function if you want to use the Internet without restrictions, and this is provided for in your tariff plan.

The Windows operating system automatically selects network interface parameters for accessing the Internet by default. A configuration with several network interfaces such as network cards is often used - several network cards are used simultaneously to connect to the Internet, to a local network, or use WiFi. To tell the system which interface to use and for what purposes, you must disable automatic route detection. To do this, each protocol needs to specify its own interface:

1. Open Start -> Control Panel -> Network and Sharing Center.
2. Find the Internet connection interface in the list and select Properties.
3. Select Properties of the Internet Protocol version 4 we need.
4. On the “Advanced” tab, uncheck Automatic metric assignment and set the serial number of the interface that will be selected for network requests, and more specifically for the Internet.
5. We perform a similar operation for all interfaces in ascending order.

Speed ​​up the Internet when choosing a DNS server

The speed at which websites load and download files depends on the DNS server your computer accesses first. When checking your speed on the website speedtest.net, you can change the server and notice the difference in the speed of receiving information. Most providers recommend setting automatic DNS detection in the TCP protocol settings. This is not always the fastest server. To select a fast DNS server, use the DNSBench program, which is located at https://www.grc.com/dns/benchmark.htm.

After downloading and launching the program, you must perform the following steps:

1. Switch to the Nameservers tab, click the Add/Remove button.
2. Press the bottom button Build custom Nameserver List.
3. Switch to the Response Time tab, click the Run Benchmark button.
4. A window with several servers will open. The fastest one will be at the top of the list. Select it and enter the IP in the TCP settings.
5. Check your browser operation. If the download speed does not increase, you can roll back the changes.

Program to increase Internet speed

To speed up your connection by optimizing system settings, use the AdvancedSystemCare program. To configure and redistribute traffic between protocols and applications, be sure to install FosSpeed. Combine different programs, methods, utilities. Most programs to improve computer performance, accelerator services for desktop computers, laptops, and mobile devices are free and downloaded online from software developer sites.

TCP Optimizer Utility

The computer's capabilities are not fully utilized when using standard operating system and browser settings. The operating system reserves some of its capacity for its service applications, Windows updates, and other cases. The TCP Optimizer utility will make it possible to automatically configure the best connection conditions by:

• resetting TCP/IP and Winsock settings;
• select default network settings;
• automatic calculation of optimal network parameters;
• ping and route tracing to nodes on the network;
• calculating the maximum transmitted packet (MTU);
• calculation of RWIN/BDP parameters, packet delay time;
• setting network parameters through the system registry.

Optimizing your connection is possible using the Internet Speed ​​Booster application. These are three utilities that provide:

• checking connection speed, ping, host;
• optimizing Windows modem and network settings;
• preventing file fragmentation;
• scheduling automatic RAM optimization;
• protection against threats on the Internet;
• setting up the Windows Registry to increase the speed of information exchange on the network;
• support for all types of connections: Dial-Up, LAN, ISDN, cable;
• simple help files;
• Supported OS: Windows 8.1, 8, 10, Vista, 7, XP, bit depth: 64 bit, x86, 32 bit.

Proximodo program

Loading a site is accompanied not only by pure HTML code, but also by hidden tags or javascript programs, URL masking, pop-up messages, etc. Proximodo can act as an intermediary between a website and your computer's browser. By adding exceptions in this program, you can change the settings and remove everything that slows down the site:

• advertising banners;
• delete cookies when closing the browser;
• enable caching for quick page navigation.

Video